Page Comparison

• If the Outside cut of the V-Groove has a Swoop, Decrease the Outside Rotation.

• If the Outside cut of the V-Groove has a Flare, Increase the Outside Rotation.

• First Cut: Cuts the Interior cut into the Fallout Clockwise.

• Second Cut: Cuts the Exterior cut into the Matboard Counter-Clockwise.

• If the Outside cut of the V-Groove has a Swoop, Decrease the Outside Rotation.

A Swoop in the Outside cut of the V-Groove is where the corners Curve Inward toward the V-Groove.

If the Outside cut of the V-Groove has a Swoop, Decrease the Outside Rotation.

The Rotation on V-Grooves controls for Swoops and Flareson V-Grooves.

Image ModifiedImage Modified

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

• If the Outside cut of the V-Groove has a Flare, Increase the Outside Rotation.

A Flare on the Outside cut of the V-Groove is where the corners Curve Away from the V-Groove.

If the Outside cut of the V-Groove has a Flare, Increase the Outside Rotation.

The Rotation on V-Grooves controls for Swoops and Flareson V-Grooves.

Image ModifiedImage Modified

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

• If the Outside cut of the V-Groove has a Swoop, Decrease the Outside Rotation.

• If the Outside cut of the V-Groove has a Flare, Increase the Outside Rotation.

The Outside Rotation on V-Grooves controls for Swoops and Flares in the Outside Cut of the V-Grooves.