Versions Compared

Version Old Version 31 New Version 32
Changes made by

dani.simmonds

dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Tool Line Too Far Up

Panel
panelIconIdatlassian-note
panelIcon:note:
bgColor#B3F5FF
Panel
panelIconId1f9d9-200d-2642-fe0f
panelIcon:man_mage:
panelIconText🧙‍♂️
bgColor#FFFAE6

  • For Additional Information: See the Vertical Home which defines the global Vertical placement of objects cut with the Blade Cartridges.

Expand
titleVertical Adjustment for Non-Blade Cartridges General Definition

The Vertical Adjustment defines the global Vertical placement of objects applied with the Non-Blade Tool Cartridges.

If the Non-Blade Tool line is applied Too Far Up Vertically, Decreasethe Vertical Adjustment.

If the Non-Blade Tool line is applied Too Far Down Vertically, Increase the Vertical Adjustment.

Image ModifiedImage Modified
Expand
titleHow to Adjust the Vertical Adjustment

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

Image ModifiedImage Modified

Tool Line Too Far Down

Panel
panelIconIdatlassian-note
panelIcon:note:
bgColor#B3F5FF

  • If the Non-Blade Tool line is applied Too Far Down Vertically, Increase the Vertical Adjustment.

Panel
panelIconId1f9d9-200d-2642-fe0f
panelIcon:man_mage:
panelIconText🧙‍♂️
bgColor#FFFAE6

  • For Additional Information: See the Vertical Home which defines the global Vertical placement of objects cut with the Blade Cartridges.

Expand
titleVertical Adjustment for Non-Blade Cartridges General Definition

The Vertical Adjustment defines the global Vertical placement of objects applied with the Non-Blade Tool Cartridges.

If the Non-Blade Tool line is applied Too Far Up Vertically, Decreasethe Vertical Adjustment.

If the Non-Blade Tool line is applied Too Far Down Vertically, Increase the Vertical Adjustment.

Image ModifiedImage Modified
Expand
titleHow to Adjust the Vertical Adjustment

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

Image ModifiedImage Modified
InfoSee Also: The Vertical Home defines the global Vertical placement of objects cut with the Blade Cartridges.