Versions Compared

Version Old Version 48 New Version 49
Changes made by

dani.simmonds

dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

New Openings Screen: Single

Info

  • Use the New Openings Screen to quickly create a template design or to start a new project.

  • The Single tab of the New Openings Screenis for creating and cutting one single opening.

Panel
panelIconIdatlassian-info
panelIcon:info:
bgColor#EAE6FF

  • Click New Mat Design on the main screen.

  • The New Openings Screen will open.

Info

  • If the New Openings Screen does not open and the FrameShop Editor is displayed instead, see Defaults: Setting Defaults for the New Openings Screen displayed further down below.

Expand
titleTemplate Definition

Templatesare specialized parametric shape generators created by Wizard.

Many of the templates have additional Properties that can be edited which can change the shape, curves and corners of the design as well as a wide assortment of Parameters.

The Template Library displays the different templates that are available for use.

Image Modified

See: Template Properties

See: Template Library

MainNewDesign70800.pngImage Modified

  • There are three tabs to select from: Single, Multi, and Array. 

  • Stay on the Single tab. 

  • The Single tab of the New Openings Screenis for creating and cutting one single opening.

Image Modified

Opening Size

  • Enter the opening Width.

  • Enter the opening Height.

Info

  • If entering Opening size first, it automatically calculates the Outside size when tabbing out of the Borders field.  

  • If entering Outside dimension first, it automatically calculates the Opening size when tabbing out of the Borders field.

Tip

  • Default Settings: See Admin > Defaults to set the default for displaying the Opening Size First or the Outside Size First on the New Openings Screen.

Expand
titleSizes Button Definition

The Sizes Button displays the Recent and Standard sizes. 

Recent lists the last ten sizes entered.

Standard lists Standard sizes associated with the current unit of measurement.

Expand
titleSwap Button Definition

The Swap Button switches the values between the Width and Height fields.

Image Added

Borders

  • Enter the Borders sizes for the Top, Sides and Bottom Borders.

Tip
displaying the Opening Size First or the Outside Size First

Borders

Enter the Borders sizes for the Top, Sides and Bottom Borders

  • the Border Order on the New Openings Screen.

Image Removed
Tip

  • Default Settings: See Admin > Editor to set the default for the Border Sizes on the New Openings Screen.

Expand
titleBorder Definition

The Border is the area of precisely definable width between the outside edge of a Mat and the edge of the Opening(s) in Designer, Nesting, and Visualization.

Image Modified

See: Border Properties

See

: Border Default Settings TipDefault Settings

:

See Admin > Defaults to set the default for the

Border

Order on the New Openings Screen. Tip

Default Settings

: See Admin > Editor to set the default for the Border Sizes on the New Openings Screen.

Image Modified

Separate Left and Right Border Sizes

  • To enter separate left and right borders, click on the Sides field name to expand it to the Left and Right border fields. 

Expand
titleBorder Definition

The Border is the area of precisely definable width between the outside edge of a Mat and the edge of the Opening(s) in Designer, Nesting, and Visualization.

Image Modified

See: Border Properties

See: Border Default Settings

Image Modified

  • The Left and Right border fields can now be edited separately. 

  • To return it to the combined Sides field, click on the Left field name to condense it back to the Sides field.

Image Modified

Outside Size

  • Enter the outside Width. 

  • Enter the outside Height.

Info

  • If entering Opening size first, it automatically calculates the Outside size when tabbing out of the Borders field.  

  • If entering Outside dimension first, it automatically calculates the Opening size when tabbing out of the Borders field.

Tip

  • Default Settings: See Admin > Defaults to set the default for displaying the Opening Size First or the Outside Size First on the New Openings Screen.

Expand
titleOutside Bevel Definition

The Outside Bevel is created by cutting into the fallout surface with the blade angled at 45°/52°, thereby slanting the bevel under the fallout surface. The matboard core is not visible from the front.

The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

Select Outside or Outside-Front of Mat from the Current Bevel Type dropdown control to edit this configuration.

Image ModifiedImage Modified

See: 45 Degree Outside Configurations

See: 45 Degree Plus Outside Configurations

See: 45 Degree Front Outside Configurations

See: 52 Degree Outside Configurations

See: 90 Degree Outside Configurations

Expand
titleSizes Button Definition

The Sizes Button displays the Recent and Standard sizes. 

Recent lists the last ten sizes entered.

Standard lists Standard sizes associated with the current unit of measurement.

Image Modified
Expand
titleSwap Button Definition

The Swap Button switches the values between the Width and Height fields

. TipDefault Settings: See Admin > Defaults to set the default for displaying the Opening Size First or the Outside Size First on the New Openings Screen

.

Image Modified

Template and Properties

  • Click on the Template Thumbnail under template design to select a different template.

Expand
titleTemplate Definition

Templatesare specialized parametric shape generators created by Wizard.

Many of the templates have additional Properties that can be edited which can change the shape, curves and corners of the design as well as a wide assortment of Parameters.

The Template Library displays the different templates that are available for use.

Image Modified

See: Template Properties

See: Template Library

Image Modified

  • The Template Library opens. 

  • Scroll through the list to see the templates available. 

  • Click on the desired Template Thumbnail to select it.

Expand
titleTemplate Definition

Templatesare specialized parametric shape generators created by Wizard.

Many of the templates have additional Properties that can be edited which can change the shape, curves and corners of the design as well as a wide assortment of Parameters.

The Template Library displays the different templates that are available for use.

Image Modified

See: Template Properties

See: Template Library

Expand
titleTemplate Library Definition

The Template Librarydisplays the different Templates of specialized parametric shape generators that are available for use in Designer.

Image Modified

See: Template Properties

See: Template Library

Image Modified

  • The new Template is displayed. 

Image Modified

Layers

  • Enter the number of Layers.

  • Enter the Reveal value for each layer. 

  • Select the Reverse Bevel checkbox to make the selected layer Reverse Bevel.

  • Select the RB button to make all of the layers Reverse Bevel.

Tip

  • Default Settings: See Admin > Editor for the default settings for the number of layers for templates placed on the Design Editor.

Tip

  • Default Settings: See Admin > Defaults for setting the default layer reveal values for templates placed on the Design Editor.

Expand
titleReverse Bevel Definition

The Reverse Bevel Opening is created by cutting into the matboard surface with the blade angled at 45°/52°, thereby slanting the bevel under the matboard surface. The matboard core is not visible from the front.

The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

Select Reverse Bevel or Reverse Bevel-Front of Mat from the Current Bevel Type dropdown control to edit this configuration.

Image ModifiedBevelType45RBSelect70800.jpgImage Modified

See: 45 Degree Reverse Bevel Opening Configurations

See: 45 Degree Plus Reverse Bevel Opening Configurations

See: 45 Degree Front Reverse Bevel Opening Configurations

See: 52 Degree Reverse Bevel Opening Configurations

Tip

  • Default Settings: See Admin > Editor for the default settings for the number of layers for templates placed on the Design Editor.

TipDefault Settings: See Admin > Defaults for setting the default layer reveal values for templates placed on the Design Editor.

Image Modified

Blade Cartridge Selection

  • Click on the Blade Cartridge Icon. 

  • Select the desired Blade Cartridge for this layer.  

Info

  • Not all cartridges are available in all scenarios. 

  • For instance, you cannot directly select the Deboss Cartridge for a template shape from the New Openings Screen.

Expand
titleCartridge Definition

A Cartridge is the physical component that holds the Blade, Deboss Stylus, Pen or other application tool.

...