Content Comparison

• Use the New Openings Screen to quickly create a template design or to start a new project.

• The Single tab of the New Openings Screenis for creating and cutting one single opening.

• Click New Mat Design on the main screen.

• The New Openings Screen will open.

• If the New Openings Screen does not open and the FrameShop Editor is displayed instead, see Defaults: Setting Defaults for the New Openings Screen displayed further down below.

Templatesare specialized parametric shape generators created by Wizard.

Many of the templates have additional Properties that can be edited which can change the shape, curves and corners of the design as well as a wide assortment of Parameters.

The Template Library displays the different templates that are available for use.

See: Template Properties

See: Template Library

The Reverse Bevel Opening is created by cutting into the matboard surface with the blade angled at 45°/52°, thereby slanting the bevel under the matboard surface. The matboard core is not visible from the front.

The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

Select Reverse Bevel or Reverse Bevel-Front of Mat from the Current Bevel Type dropdown control to edit this configuration.

See: 45 Degree Reverse Bevel Opening Configurations

See: 45 Degree Plus Reverse Bevel Opening Configurations

See: 45 Degree Front Reverse Bevel Opening Configurations

See: 52 Degree Reverse Bevel Opening Configurations

• Default Settings: See Admin > Editor for the default settings for the number of layers for templates placed on the Design Editor.

• Default Settings: See Admin > Defaults for setting the default layer reveal values for templates placed on the Design Editor.