Content Comparison

Not Cutting the Outside
Select Off from the Outside Cut Options dropdown control to not cut the Outside of the mat on the CMC Z1

and

, Z (9000z), 9000 and 8000+.
The Outside of the mat will not be cut.
Optionally, select one of the other Outside Cut Options to cut the Outside of the mat.

Image Modified

See Also: Cut the Outside Toggle
Optionally, click the Cut the Outside Toggle to Off. The Outside of the mat will not be cut. Select On to cut the Outside of the mat.	Image Modified

Advanced Outside Options
The same Outside Cut Options are available on the Advanced Outside Options screen from the Cut Mode dropdown control. Click the Set Advanced Options button on the Cut Preview screen.	Image Modified
On the Advanced Outside Options screen, set Cut Mode to Off. The Cut Mode matches the selections from the Outside Cut Options as described above. Click OK. Optionally, select one of the other Cut Mode options to cut the Outside of the mat.	Image Modified
The Outside of the mat will not be cut.	Image Modified

Defaults: Set the Default for Cutting the Outside

Expand

title	Default Setting for Cutting the Outside

The default setting for Cutting the Outside can be set in the Admin > Editor section.

Image Modified

Expand

title	Default Settings for the Advanced Options

The default setting for the Advanced Options can be set in the Admin > Cutting section.

Image Modified

Expand

title	Default Setting for the Default Cut Mode

The default setting for the Cut Mode can be set in the Admin > Cutting section.

Image Modified