Versions Compared

Old Version 30

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version 31

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Cut the Outside

Cutting the Outside

  • Select Cut the Outside to cut the outside of the mat. 

Info

  • When Cut the Outside is selected, the matboard displays as a Solid Color.

Not Cutting the Outside

  • Unselect the Cut the Outside to not cut the outside of the mat. 

Info

  • Unchecking Cut the Outside displays the 1.5 inch (3.8cm) Uncuttable Region in a checkerboard pattern. The uncuttable region is the portion of the matboard that is placed into the CMC rails when cutting. 

  • The Z1 and Z(9000z) will not display an uncuttable region because of the zero waste clamping system, unless the matboard dimensions entered are larger than the machine can physically cut (see The Uncuttable Region on Designs That are Too Big below).

  • Do not place objects into the uncuttable region unless you select Cut the Outside,  or Auto Offset or use a Rail Dodge.

The Uncuttable Region on Designs That are Too Big

Info

  • If a design is Too Big to cut, the Uncuttable Region is displayed as a Checkerboard Pattern along the sides that are too big. 

Info

  • The Z1 and Z(9000z) will not display an uncuttable region because of the zero waste clamping system unless the matboard dimensions entered are larger than the machine can physically cut.

...