Page Comparison

• Set Unidirectional from the Cut Pattern dropdown control to cut Tiled mats in One Direction only on the CMC Z1, Z(9000z), 9000 and 8000+.

• Click the Set Advanced Options

• This will cut the Outside of Tiled mats in One Direction only.

• This is useful if you want the Outside cuts of the Tiled mats to be exactly the same size, as the sizes may be off by the thickness of the blade when it's cutting Bi-Directional (two different directions) when cutting the Outside.

• See Stairstep vs. Optimized vs. Unidirectional for information on the outside cutting differences between the different Cut Patterns.

The default setting for Cutting the Outside can be set in the Admin > Editor section.

Image Modified

The default setting for 90 Degree Outside can be set in the Admin > Cutting section.

Image Modified

The default setting for the Advanced Options can be set in the Admin > Cutting section.

Image Modified

The default setting for the Cut Mode can be set in the Admin > Cutting section.

Image Modified