Versions Compared

Old Version 20

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version 21

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Cut Pattern: Optimized

Info

  • Set Optimized from the Cut Pattern dropdown control to cut Tiled mats Bi-Directionally, which will zig-zag back and forth when cutting the Outside on tiled mats on the CMC Z1

and

  • , Z (9000z), 9000 and 8000+.

Image Modified

  • Select Optimized from the Cut Pattern dropdown control.

  • Click OK.

Image Modified

  • It will cut the Outsides of Tiled mats in a Bi-Directional, zig-zag fashion.

Image Modified

Stairstep vs. Optimized vs. Unidirectional

Info
Image Modified

Defaults: Set the Default for Cutting the Outside 

Expand
titleDefault Setting for Cutting the Outside

The default setting for Cutting the Outside can be set in the Admin > Editor section.

Image Modified

Defaults: Set the Default for 90 Degree Outside Cut

Expand
titleDefault Setting for 90 Degree Outside Cut

The default setting for 90 Degree Outside can be set in the Admin > Cutting section.

Image Modified

Defaults: Set the Default for the Advanced Options

Expand
titleDefault Setting for the Advanced Options

The default setting for the Advanced Options can be set in the Admin > Cutting section.

Image Modified

Defaults: Set the Default for the Cut Pattern

Expand
titleDefault Setting for the Default Cut Pattern

The default setting for the Cut Mode can be set in the Admin > Cutting section. 

Image Modified