Page Comparison

• This lesson shows how to Mirror a CutArt to create a Scrolled Starburst design.

The Mirror function will create a Mirror copy of the selected object along the selected axis in Trace andDesignerand mirror the image horizontally in Visualize.

See: Mirror in Trace Function

See: Mirror CutArt in Designer

See: Mirror Image in Visualization

CutArt™ are simple shapes and design elements created by Wizard that can be added to designs.

CutArts can be applied to your current design and edited, such as resizing and rotating.

They can be Cut, Debossed, Penned or cut on Vinyl.

See: Add CutArt Function

• Place a one Layer 4 x 5" #506 Star Template on the FrameShop Design Editor.

Templatesare specialized parametric shape generators created by Wizard.

Many of the templates have additional Properties that can be edited which can change the shape, curves and corners of the design as well as a wide assortment of Parameters.

The Template Library displays the different templates that are available for use.

See: Template Properties

See: Template Library

• Click on the Properties tab.

• Click on the Parameters tab.

• Change the No. of Points to 6.

• Change the Spikiness to 0.

• Change the Mode to 2. 

• Change the Line Length to 2.85".

The Parameters are set of specified variable characteristics related to the selected object that can be modified through the accompanying fields in Designer.

For example, the Chamfer is the symmetrical angled surface at the corner of the Template.

In Designer, the Template Parameter Map displays a diagram describing each parameter field for the current Template.