Page Comparison

...

Minimum Width and Height

Min Width

Info
The Original CutArt Width is displayed in the Min Width field.

Min Height

Info
The Original CutArt Height is displayed in the Min Height field.

Note
Cutting below the Minimum Width/Height is not recommended.

Expand

title	Min Height and Width Definition

Min Height displays the Minimum Height that the selected CutArt or LetterMat has been tested to cut.

The CutArt/LetterMat can be Debossed or Penned at a much smaller size than it can be cut.

Image Added

See: CutArt Properties

See: LetterMat Properties

Info
Use the CutArt Options section to select Mirror, set KAR and Use Original Size for the CutArt.

Info
Mirror flips the CutArt Horizontally.

Info
To flip the design Vertically, see Rotation above.

Info
To flip the design Vertically, see Rotation above.

Info
Keep Aspect Ratio (KAR) keeps the CutArt Height/Width Proportionate when resizing.

Uncheck the Keep Aspect Ratio (KAR) checkbox to adjust the height/width of the LetterMat separately.

Note
For best results, it is recommended to have KAR checked to avoid skewing the CutArt.

Expand

title	KAR Definition

Keep Aspect Ratio (KAR) keeps the CutArt, Image, LetterMat, etc. Height and Width proportionate to avoid distortion in Designer.

See: CutArt Properties

See: Image Properties

See: LetterMat Properties

See: TTF Properties

Info
The CutArt will remain Height/Width proportionate when resized.

The Use Original Size button to reset the CutArt to the Original Size it was drawn.

Note
Cutting smaller than Original Size is not recommended, and may give unexpected results. CutArts can be Debossed, Penned and cut on Vinyl much smaller than they can be cut on Matboard.

...