Versions Compared

Version Old Version 21 New Version 22
Changes made by

dani.simmonds

dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

View file
nameImportingOtherVectorDesignsIntoTrace2021-03-17.pdf

Drawing Designs in Other Programs

Info

  • You can import the design from another Vector Graphics Program as long as the other software can export it to an SVG (Scalable Vector Graphic) or as a DXF (Drawing Exchange Format) format.

  • Use the instructions below to export and open SVG/DXF files if you prefer to work in that file format.

Expand
titleDXF Definition

A DXF (Drawing Exchange Format) is a data file format developed to enable data interoperability between Other Drawing Programsother drawing programs, which can be loaded into Trace.

Image Added

See: File Type Definitions

Expand
titleSVG Definition

An SVG (Scalable Vector Graphics) is a Web-Friendly XML-based (Extensible Markup Language) Vector image format for defining two-dimensional graphics from Trace.

This Web-Friendly format allows you to display the design on your website.

The SVG is independent of resolution, which means it can be resized without losing detail.

Image Added

See: File Format Definition

Expand
titleVector Definition

A Vector is a graphic drawing in Trace that contains Paths, which are defined by a Start and End point and may contain other Points, Curves, and Angles.

The Vector Paths are independent of resolution, which means they can be resized without losing detail.

A Path is A Path is also a file format of Trace which saves all of the Vector elements of the design as you work, whether it is Traced or not. 

When the design is completed, save it as a CutArt to load into Designer.

Image Added

See: Raster Definition

See: Vector Definition

See: Raster to Vector Definition

See: Vectorize in Designer Function

See: Vectorize in Trace Function

Vector Versus Raster Format

Info

Vector Graphics use geometrical elements such as points, lines, curves, and shapes, which are all based on mathematical equations, to represent images in computer graphics.

Expand
titleVector Definition

A Vector is a graphic drawing in Trace that contains Paths, which are defined by a Start and End point and may contain other Points, Curves, and Angles.

The Vector Paths are independent of resolution, which means they can be resized without losing detail.

A Path is A Path is also a file format of Trace which saves all of the Vector elements of the design as you work, whether it is Traced or not. 

When the design is completed, save it as a CutArt to load into Designer.

Image Added

See: Raster Definition

See: Vector Definition

See: Raster to Vector Definition

See: Vectorize in Designer Function

See: Vectorize in Trace Function

Info

Raster Graphic images or bitmaps are a data structure representing a generally rectangular grid of pixels, or points of color, such as a photo, viewable via a monitor, paper, or other display medium.

Expand
titleRaster Definition

A Rasteris a Bitmap image (JPEG, PNG, GIF, etc.) that is made up of a grid of Pixels, such as a photograph, which can be loaded in Trace, Designer and Visualize.

Image Added

See: Vector Definition

See: Raster to Vector Definition

See: Vectorize in Designer Function

See: Vectorize in Trace Function

Info

  • So as an example, Illustrator is a Vector-Based Program, and Photoshop is a Raster-Based Program.  Most Vector programs can export their designs as a SVG/DXF file which can then be opened in Trace.

Export Design to SVG

Panel
panelIconIdatlassian-note
panelIcon:note:
bgColor#B3F5FF

  • Open the design in your Vector Graphics program.

  • Export it as a SVG/DXF file.

    • The file will be exported to the selected file name.

Expand
titleSVG Definition

An SVG (Scalable Vector Graphics) is a Web-Friendly XML-based (Extensible Markup Language) Vector image format for defining two-dimensional graphics from Trace.

This Web-Friendly format allows you to display the design on your website.

The SVG is independent of resolution, which means it can be resized without losing detail.

Image Added

See: File Format Definition

Expand
titleDXF Definition

A DXF (Drawing Exchange Format) is a data file format developed to enable data interoperability between Other Drawing Programsother drawing programs, which can be loaded into Trace.

Image Added

See: File Type Definitions

Open the SVG in Trace

Panel
panelIconIdatlassian-note
panelIcon:note:
bgColor#B3F5FF

  • Click File > Load in Trace.

  • Navigate to the desired SVG/DXF file and click Open.

  • The design is displayed in Trace.

    • You can now edit and trace the design as desired.

Expand
titleSVG Definition

An SVG (Scalable Vector Graphics) is a Web-Friendly XML-based (Extensible Markup Language) Vector image format for defining two-dimensional graphics from Trace.

This Web-Friendly format allows you to display the design on your website.

The SVG is independent of resolution, which means it can be resized without losing detail.

Image Modified

See: File Format Definition

Image Added

If The Design is Empty Or is Unusable

Problem

Panel
panelIconIdatlassian-note
panelIcon:note:
bgColor#B3F5FF

  • No design is displayed or it displays wild arcs or features not part of the original design.

Resolution

Panel
panelIconIdatlassian-note
panelIcon:note:
bgColor#B3F5FF

  • Open the design in your original Vector Graphics program.

  • Try a different setting and re-export it as an SVG.

  • If it still does not import correctly, make a copy of the original design and try simplifying it.

    • Try ungrouping all objects and converting to curves.

    • Make sure the unit is set to inches.

    • Export text as curves.

    • Export bitmap as jpeg.

Saving Your Work as You Go

Panel
panelIconIdatlassian-note
panelIcon:note:
bgColor#B3F5FF

  • Save your design periodically as you work on it in Trace.

  • Saving a file as a Wizard Path (Path) allows the user to save a raw design in progress without having to trace it first.

    • Saving a design as a CutArt (WCX or WCA) requires that the user trace the design first. 

    • Wizard Path (Path) filesare limited in that they cannot be applied to projects or resized or have any of the other benefits of CutArt; they are simply a raw storage file type so that the user can save their work between sessions.

  • Once your design is completed, trace the design and save it as a CutArt (WCX) and load it into any FrameShop project, where it can be resized, rotated, mirrored, or a different cartridge selection applied.

Expand
titlePath Definition

A Path (.wpx) is a drawn Vector graphic path in Trace which is defined by a Start and End point, which may contain other Points, Curves, and Angles.

The Paths are independent of resolution, which means they can be resized without losing detail.

A The Path  is also a file format of in Trace which saves will save all of the Vectorelements of the design as you work, whether it is Traced or not. 

When the design is completed, save it as a CutArt to load into Designer.

Image Added
Expand
titleCutArt Definition

CutArt™ are simple shapes and design elements created by Wizard that can be added to designs.

CutArts can be applied to your current design and resized and rotated. edited, such as resizing and rotating.

They can be Cut, Debossed, Penned or cut on Vinyl.

Image Added

See: Add CutArt Function