Page Comparison

• Use CutArt Properties to edit the individual proprietary adjustments available for the CutArt.

• Optionally, Right-Click on the CutArt and select Edit.

CutArt™ are simple shapes and design elements created by Wizard that can be added to designs.

CutArts can be applied to your current design and

• The name of the current CutArt is displayed in the Name field. 

• This overwrites the default label displaying the opening size if toggled on in the Defaults or on the Editor Edit Menu. 

• Change the CutArt with the Change CutArt button.

Set the default for Auto Label Multi Openings in the Admin > Editor section.

Image Modified

The Sizes Button displays the

The Swap Button switches the values between the width and height fields.

Set the default for the Sizes dropdown control in the Admin > Defaults section.

Image Modified

Set the default Outside and Opening Size in the Admin > Editor section.

Image Modified

Set the default for Enforce Minimum Sizes in the Admin > Editor section.

Image Modified

• Lock the size of the object to avoid adjusting it when dragging the mouse.

Use the Lock/Unlock feature to prevent the size of the opening from being changed by accidentally dragging the control corners with the mouse in Designer.

• Use the X/Y Position fields to move objects to specific Horizontal/Vertical coordinates.

• Lines shown for illustration.

The

The Y Position field is used to

• The selected object will pivot from the center point.  

• *To rotate a group of template objects, see Rotation on the Advanced Tab. 

• *To lock a group of template objects together and rotate them as one object, see Group Openings Button and then use the Rotate field under the Merged Object Properties, or the Rotation button on the Advanced Tab.

The Rotation function in Designer is the action of rotating the selected object(s) around an axis or center by the specified number of degrees.

Image Modified

See: Rotation in Designer Function

• The Original CutArt Width is displayed in the Min Width field.  

• The Original CutArt Height is displayed in the Min Height field.

• Cutting below the Minimum Width/Height is not recommended.

Min Height displays the Minimum Height that the selected CutArt or LetterMat has been tested to cut. The CutArt/LetterMat can be Debossed or Penned at a much smaller size.

• Use the CutArt Options section to select Mirror, set KAR and Use Original Size for the CutArt.

• Mirror flips the CutArt Horizontally.

To flip the design Vertically, see Rotation above.

• To flip the design Vertically, see Rotation above.

• Keep Aspect Ratio (KAR) keeps the CutArt Height/Width Proportionate when resizing.

• For best results, it is recommended to have KAR checked to avoid skewing the CutArt.

Keep Aspect Ratio (KAR) keeps the CutArt, Image, LetterMat, etc. Height and Width proportionate to avoid distortion in Designer.

Image Modified

See: CutArt Properties

See: Image Properties

See: LetterMat Properties

See: TTF Properties

• The CutArt will remain Height/Width proportionate when resized.

• Cutting smaller than Original Size is not recommended, and may give unexpected results.

• CutArts can be Debossed, Penned and cut on Vinyl much smaller than they can be cut on Matboard.

A Cartridge is the physical component that holds

• Selections available are dependent upon the Cartridge selected.