Deboss Wide Cartridge | |
|---|---|
The Blue Deboss Wide Cartridge presses a wide path into the matboard to create a subtle design. |  |
Select the Deboss Wide Cartridge Type | |
|---|---|
Select the Deboss Tab on the Configurations screen. Select the Wide-Blue cartridge from the Cartridge dropdown control. |  |
Select the Area of Concern for Wide Deboss Below:Be sure to select the Deboss Wide from the Current Bevel Type dropdown control. |
|---|
Wide Deboss is Applied to the Wrong Place Horizontally | |
|---|---|
Select this topic to adjust the Horizontal Adjustment. |  |
Wide Deboss is Applied to the Wrong Place Vertically | |
|---|---|
Select this topic to adjust the Vertical Adjustment. |  |
Wide Deboss is the Wrong Size | |
|---|---|
Select this topic to adjust the Opening Adjustment. |  |
Blade Depth Prompt is Incorrect Depth | |
|---|---|
Select this topic to adjust the Depth Setting. |  |
Deboss is Tearing the Mat | |
|---|---|
Select this topic to adjust the Corner Pause. |  |
Wide Deboss Lines are too Long | |
|---|---|
Select this topic to adjust the Overshoot. |  |
Wide Deboss Lines are too Short | |
|---|---|
Select this topic to adjust the Overshoot. |  |
Setting Head to Plunge Between Segments | |
|---|---|
Select this topic to adjust the Plunge between segments. |  |
Troubleshooting Button | |
|---|---|
Use the Troubleshooting utility to make quick edits to the Configurations for a single object on the Cutting Preview. |  |
...