Versions Compared

Old Version 74

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version 75

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

  • If the Oval Drop has a Feather, Decrease the Oval Rotation.

    • If the Oval Drop has a Bump, IncreasetheOval Rotation.

    Oval Rotation

    on Openings

    Panel
    panelIconIdatlassian-note
    panelIcon:note:
    bgColor#B3F5FF

    Contents:

    Child pages (Children Display)
    allChildrentrue

    Expand
    titleFeather in Oval Opening Definition

    A Feather in an Oval Opening is a Fringe of material left behind where the cut started and ended on the Oval.

    If the Oval Opening has a Feather, Decrease the Oval Rotation.

    The Oval Rotation controls for Bumps or Feathers on an Oval.

    Image ModifiedImage Modified

    See: Oval Rotation for Openings Configurations

    Expand
    titleBumps in Oval Opening Definition

    A Bump in an Oval Openingis a Lumpof material left behind where the cut started and ended.

    If the Oval Opening has a Bump, Increasethe Oval Rotation.

    The Oval Rotation controls for Bumps or Featherson an Oval Opening.

    Image ModifiedImage Modified

    See: Oval Rotation for Openings Configurations

    Expand
    title

    How to Adjust the Oval Rotation

    When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

    Click OK and do another test cut.

    Continue making adjustments until the desired outcome is achieved.

    Image RemovedImage Removed

    Oval Rotation on Drops

    Panel
    panelIconIdatlassian-note
    panelIcon:note:
    bgColor#B3F5FF
    Expand
    title
    Feathers in Oval Drop Definition

    A Feather in an Oval Drop is a Fringe of material left behind where the cut started and ended on the Oval.

    If the Oval Drop has a Feather, Decrease the Oval Rotation.

    The Oval Rotation controls for Bumps or Featherson an Oval.

    Image ModifiedImage Modified

    See: Oval Rotation for Drops Configurations

    Expand
    titleBump in Oval Drop Definition

    A Bump in an Oval Dropis a Lumpof material left behind where the cut started and ended.

    If the Oval Drop has a Bump, Increasethe Oval Rotation.

    The Oval Rotation controls for Bumps or Featherson an Oval Opening.

    Image ModifiedImage Modified

    See: Oval Rotation for Drops Configurations

    Expand
    titleHow to Adjust the Oval Rotation

    When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

    Click OK and do another test cut.

    Continue making adjustments until the desired outcome is achieved.

    Image RemovedImage Removed

    Oval Rotation on Outside

    PanelpanelIconIdatlassian-notepanelIcon:note:bgColor#B3F5FF

  • If the Oval Outside has a Feather, Decrease the Oval Rotation.

    • If the Oval Outside has a Bump, IncreasetheOval Rotation.

    Outside Oval Rotation on Oval V-Grooves

    Panel
    panelIconIdatlassian-note
    panelIcon:note:
    bgColor#B3F5FF

  • If the Outside cut of the Oval V-Groove has a Feather, Increase the Outside Oval Rotation.

    • If the Outside cut of the Oval V-Groove has a Bump, Decreasethe Outside Oval Rotation. Expandtitle

    Expand
    titleFeathers in the Oval Outside Definition

    A Feather in an Oval Outside is a Fringe of material left behind where the cut started and ended on the Oval.

    If the Oval Outside has a Feather, Decrease the Oval Rotation.

    The Oval Rotation controls for Bumps or Featherson an Oval.

    Image ModifiedImage Modified

    See: Oval Rotation for the Outside Configurations

    Expand
    titleBumps in the Oval Outside Definition

    A Bump in an Oval Outsideis a Lumpof material left behind where the cut started and ended.

    If the Oval Outside has a Bump, Increasethe Oval Rotation.

    The Oval Rotation controls for Bumps or Featherson an Oval Opening.

    Image ModifiedImage Modified

    See: Oval Rotation for the Outside Configurations

    Expand
    title

    How to Adjust the Oval Rotation

    When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

    Click OK and do another test cut.

    Continue making adjustments until the desired outcome is achieved.

    Image RemovedImage Removed

    Outside Oval V-Groove Feather Definition

    A Feather in the Outside cut of an Oval V-Groove is a Fringe of material left behind where the cut started and ended on the Outside cut of the Oval V-Groove.

    If the Outside cut of the Oval V-Groove has a Feather, Increase the Outside Oval Rotation.

    The Oval Rotation for V-Grooves controls for Bumps or Featherson an Oval V-Groove.

    Image ModifiedImage Modified

    See: Outside Oval Rotation for V-Grooves Configurations

    Expand
    titleOutside Oval V-Groove Bump Definition

    A Bump in the Outside cut of an Oval V-Groove is a Lump of material left behind where the cut started and ended on the Outside cut of the Oval V-Groove.

    If the Outside cut of the Oval V-Groove has a Bump, Decreasethe Outside Oval Rotation.

    The Oval Rotation for V-Grooves controls for Bumps or Featherson an Oval V-Groove.

    Image ModifiedImage Modified

    See: Outside Oval Rotation for V-Grooves

    Configurations Expand
    titleHow to Adjust the Oval Rotation
    When adjusting

    Configurations

    , click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

    Click OK and do another test cut.

    Continue making adjustments until the desired outcome is achieved.

    Image RemovedImage Removed

    Inside Oval Rotation on Oval V-Grooves

    Panel
    panelIconIdatlassian-note
    panelIcon:note:
    bgColor#B3F5FF
    If the Inside cut of the Oval V-Groove has a Feather, Decrease the Inside Oval Rotation.

    If the Inside cut of theOval V-Groove has a Bump, Increase the Inside Oval Rotation.

    Expand
    titleInside Oval V-Groove Feather Definition

    A Feather in the Inside cut of an Oval V-Groove is a Fringe of material left behind where the cut started and ended on the Inside Cut of the Oval V-Groove.

    If the Inside cut of the Oval V-Groove has a Feather, Decrease the Inside Oval Rotation.

    The Oval Rotation for V-Grooves controls for Bumps or Featherson an Oval V-Groove.

    Image ModifiedImage Modified

    See: Inside Oval Rotation for V-Grooves Configurations

    Expand
    titleInside Oval V-Groove Bump Definition

    A Bump in the Inside cut of an Oval V-Groove is a Lump of material left behind where the cut started and ended on either the Inside Cut of the Oval V-Groove.

    If the Inside cut of theOval V-Groove has a Bump, Increase the Inside Oval Rotation.

    The Oval Rotation for V-Grooves controls for Bumps or Featherson an Oval V-Groove.

    Image ModifiedImage Modified

    See: Inside Oval Rotation for V-Grooves Configurations

    Expand
    titleHow to Adjust the Oval Rotation

    When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

    Click OK and do another test cut.

    Continue making adjustments until the desired outcome is achieved.

    Image ModifiedImage Modified

    See Also: Troubleshooting Utility for Ovals

    Panel
    panelIconIdatlassian-note
    panelIcon:note:
    bgColor#B3F5FF

  • If the Outside cut of the Oval V-Groove has a Feather, Increase the Outside Oval Rotation.

    • If the Outside cut of the Oval V-Groove has a Bump, Decreasethe Outside Oval Rotation.

  • If the Inside cut of the Oval V-Groove has a Feather, Decrease the Inside Oval Rotation.

    • If the Inside cut of theOval V-Groove has a Bump, Increase the Inside Oval Rotation.
    Image AddedImage AddedImage AddedImage Modified

    See Also: Oval Rotation Utility

    Panel
    panelIconIdatlassian-note
    panelIcon:note:
    bgColor#B3F5FF