Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Bump Definition

Panel
panelIconIdatlassian-plus
panelIcon:plus:
panelIconText:plus:
bgColor#FFFAE6
  • A Bump in an Oval Openingis a Lumpof material left behind where the cut started and ended.

Expand
titleOval Rotation General Definition

The Oval Rotation controls for Feathersor Bumpson an Oval Opening.

Expand
titleBumps Oval Rotation General Definition

A Bump in an Oval Openingis a Lumpof material left behind where the cut started and ended.

If the Oval Opening has a Bump, IncreasetheOval Rotation.

The Oval Rotation controls for Bumps or Feathers on an Oval Opening.

See: Oval Rotation Configurations

See: Oval Rotation for Openings Configurations

See: Oval Rotation for Drops Configurations

See: Oval Rotation for the Outside Configurations

See: Outside Oval Rotation for V-Grooves Configurations

See: Inside Oval Rotation for V-Grooves Configurations

Expand
titleBumps in Opening Definition

A Bump in an Oval Openingis a Lumpof material left behind where the cut started and ended.

If the Oval Opening has a Bump, IncreasetheOval Rotation.

See: Oval Rotation Configurations

Expand
titleBump in Drop Definition

A Bump in an Oval Dropis a Lumpof material left behind where the cut started and ended.

If the Oval Drop has a Bump, IncreasetheOval Rotation.

See: Oval Rotation Configurations

Expand
titleBumps in the Outside Definition

A Bump in an Oval Outsideis a Lumpof material left behind where the cut started and ended.

If the Oval Outside has a Bump, IncreasetheOval Rotation.

See: Oval Rotation Configurations

Expand
titleOutside Oval Rotation on V-Grooves General Definition

The Outside Oval Rotation for V-Grooves controls for Bumpsor Featherson the Outside Cut of an Oval V-Groove.

Expand
titleOutside V-Groove Bump Definition

A Bump in the Outside cut of an Oval V-Groove is a Lump of material left behind where the cut started and ended on the Outside cut of the Oval V-Groove.

If the Outside cut of the Oval V-Groove cuts with a Bump, Decreasethe Outside Oval Rotation.

See: Outside Oval Rotation Configurations for V-Grooves

Expand
titleInside Oval Rotation on V-Grooves General Definition

The Inside Oval Rotation for V-Grooves controls for Bumpsor Featherson the Inside Cut of an Oval V-Groove.

Expand
titleInside V-Groove Bump Definition

A Bump in the Inside cut of an Oval V-Groove is a Lump of material left behind where the cut started and ended on either the Inside Cut of the Oval V-Groove.

If the Inside cut of theOval V-Groove cuts with a Bump, Increase the Inside Oval Rotation.

See: Inside Oval Rotation Configurations for V-Grooves

Expand
titleHow to Adjust the Oval Rotation

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.