Page Comparison

Using the Backup and Overcut Display on the Cut Preview for Troubleshooting

Info
See Using the Backup and Overcut Display on the Cut Preview for Troubleshooting the backups and overcuts displayed on the Cut Preview.

Interior Definition

Expand

title	Exterior Backup General Definition

title

The Exterior Backup controls where the Blade Plunges into the Blade Plunges into the Matboard(not the Fallout) on the Exterior cutCuts of Openings.

The Exterior Backup field is marked with a Green Arrow on the Configuration screen and the Map illustration.Cut is where the Blade Plunges or Retracts from the Matboard (not the Fallout).

If the Exterior Backup is cut too Short, it can leave leaving a Hook in the corner, Increase the Exterior Backup.

If the Exterior Backup is cut too Too Long, Decrease the Exterior Backup.

If the Exterior Backup is cut too Too Short, Increase the Exterior Backup.

Expand

Backup

The Interior Backup controls where the Blade Plunges into the Fallout (not the Matboard) on the Interior cuts of Non-Oval Openings.

The Interior Exterior Backup field is marked with a Black Green Arrow on the Configuration screen and the Map illustration.

If the Interior Backup is cut too Long, Decrease the Interior Backup.

If the Interior Backup is cut too Short, Increase the Interior Backup.

Image Added

See: Exterior Backup for Openings Configurations

See: Exterior Backup for Drops Configurations

See: Exterior Backup for the Outside Configurations

See: Exterior Backup for V-Grooves Configurations

See: Exterior Backup for Creases Configurations

Interior

Expand

title	Exterior Backup on V-Groove Backup Definition

title

The V-Groove Exterior Backup Backup controls where the Blade Plunges into the Blade Plunges into the Matboard (not the Fallout) on the Exterior cuts of the Outside Cut of the V-Groove.

The V-Groove Exterior Backup field is marked with a Green Arrow on the Configurations screen and the Map illustration.Cut is where the Blade Plunges or Retracts from the Matboard (not the Fallout).

If the Exterior Backup on the Outside Cut of the V-Groove is cut too Too Long, Decrease the Exterior Backup.

If the Exterior Backup on the Outside Cut of the V-Groove is cut too Too Short, Increase the Exterior Backup.

Expand

The V-Groove Exterior Backup field is marked with a Green Arrow on the Configuration screen and the Mapillustration.

Image AddedImage Added
See: V-Groove Exterior Backup Configurations

Expand

title	Exterior Overcut General Definition

The V-Groove Interior Backup controls where the Blade Plunges into the Fallout Exterior Overcut controls where the BladeRetracts from the Matboard (not the MatboardFallout) on the Interior Exterior cuts on the Inside Cut of the V-Grooveof Openings.

The V-Groove Interior Backup field is marked with a Black Arrow on the Configurations screen and the Map illustration.If the Interior Backup on the Inside Cutof the V-Groove is cut too Long, Decrease the Interior Backup.If the Interior Backup on the Inside Cutof the V-Groove is cut too Short, Increase the Interior Backup.

Expand

title	Exterior Overcut Definition

The Exterior Overcut controls where the Blade Retracts from the Exterior Cut is where the Blade Plunges or Retracts from the Matboard (not the Fallout).

If the Exterior Overcut is cut Too Long, Decrease the Exterior Overcut.

If the Exterior Overcut is cut Too Short, Increase the Exterior Overcut.

The Exterior Overcut field is marked with a Red Arrow on the Configuration screen and the Mapillustration.

Image AddedImage Added
See: Exterior Overcut for Openings Configurations
See: Exterior Overcut for Drops Configurations
See: Exterior Overcut for the Outside Configurations
See: Exterior Overcut for V-Grooves Configurations
See: Exterior Overcut for Creases Configurations

Expand

title	V-Groove Exterior Overcut of V-Grooves Definition

The V-Groove Exterior Overcut controls where the Blade Retracts from the Matboard(not the Fallout)on the Exterior cutcuts of the Outside Cut of the Non-Oval V-Groove.

The Exterior Overcut field is marked with a Red Arrow on the Configuration screen and the Map illustration.Cut is where the Blade Plunges or Retracts from the Matboard (not the Fallout).

If the Exterior Overcut on the Outside Cut of the V-Groove is cut too Too Long, Decreasethe Exterior Overcut.

If the Exterior Overcut on the Outside Cut of the V-Groove is cut too Too Short, Increase the Exterior Overcut.

The V-Groove Exterior Overcut field is marked with a Red Arrow on the Configuration screen and the Mapillustration.

Image AddedImage Added
See: V-Groove Exterior Overcut Configurations

Expand

title	Interior Overcut Backup General Definition

The Interior OvercutBackup controls where the Blade Retracts from the Blade Plunges into the Fallout (not the Matboard) on the Interior cutcuts of Openings.

The Interior Overcut field is marked with a White Arrow on the Configuration screen and the Map illustration.Cut is where the Blade Plunges or Retracts from the Fallout (not the Matboard).

If the Interior OvercutBackup is cut too Too Long, Decrease the Interior OvercutBackup.

If the Interior OvercutBackup is cut too Too Short, Increase the Interior Overcut.Backup.

The Interior Backup field is marked with a Black Arrow on the Configuration screen and the Mapillustration.

Image AddedImage Added
See: Interior Backup for Openings Configurations
See: Interior Backup for Drops Configurations
See: Interior Backup for the Outside Configurations
See: Interior Backup for V-Grooves Configurations

Expand

title	Exterior Interior Backup on V-Groove Overcut Grooves Definition

The V-Groove Exterior Overcut controls where the Blade Retracts from the Matboard (not the Fallout)on the Exterior cuts of the Outside Interior Backup controls where the Blade Plunges into the Fallout (not the Matboard) on the Interior cuts on the Inside Cut of the V-Groove.

The Interior Cut is where the Blade Plunges or Retracts from the Fallout (not the Matboard).

If the Interior Backup on the Inside Cut of the V-Groove is cut Too Long, Decrease the Interior Backup.

If the Interior Backup on the Inside Cut of the V-Groove is cut Too Short, Increase the Interior Backup.

The V-Groove Exterior OvercutInterior Backup field is marked with a Red Black Arrow on the Configurations Configuration screen and the Mapillustration.If the Exterior Overcut on the Outside Cut of the V-Groove is cut too

Image AddedImage Added
See: V-Groove Interior Backup Configurations

Expand

title	Interior Overcut General Definition

The Interior Overcut controls where the Blade Retracts from the Fallout (not the Matboard) on the Interior cuts of Openings.

The Interior Cut is where the Blade Plunges or Retracts from the Fallout (not the Matboard).

If the Interior Overcut is cut Too Long, Decreasethe Exterior Interior Overcut.

If the Exterior Overcut on the Outside Cut of the V-Groove Interior Overcut is cut too Too Short, Increase the Exterior Overcut. Interior Overcut.

The Interior Overcut field is marked with a White Arrow on the Configuration screen and the Mapillustration.

Image AddedImage Added
See: Interior Overcut for Openings Configurations
See: Interior Overcut for Drops Configurations
See: Interior Overcut for the Outside Configurations
See: Interior Overcut for V-Grooves Configurations

Expand

title	Interior Overcut of V-Groove Overcut Grooves Definition

The V-Groove Interior Overcut controls where the Blade the Blade Retracts from the Fallout (not the Matboard) on the Interior cuts of the Inside Cut of the V-Groove.

The V-Groove Interior Overcut field is marked with a White Arrow on the Configurations screen and the Map illustration.Cut is where the Blade Plunges or Retracts from the Fallout (not the Matboard).