Page Comparison

Interior Backup

Definition Expand

title	Interior Backup Definition

The Interior Backup controls where the Blade Plunges into the Fallout (not the Matboard)

Openings

.

The Interior Backup field is marked with a Black Arrow on the Configuration screen and the Map illustration.

If the Interior Backup is cut Too Long, Decrease the Interior Backup.

If the Interior Backup is cut Too Short, Increase the Interior Backup.

Expand

title	How to Adjust the Interior Backup

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

Image Removed

Select the Bevel Type for the Interior Backup to be Edited:

Problem:

Panel

panelIconId	atlassian-note
panelIcon	:note:
bgColor	#B3F5FF

If the Interior Backup on Openings cuts Too long or Too short.

Resolution:

Panel

panelIconId	atlassian-note
panelIcon	:note:
bgColor	#B3F5FF

Interior Backup cuts Too Long:
is cut Too Long, Decrease the Interior Backup.

Panel

panelIconId	atlassian-note
panelIcon	:note:
bgColor	#B3F5FF

Interior Backup cuts Too Short:
If the Interior Backup is cut Too Short, Increase the Interior Backup.

Expand

title	Interior Backup on Openings Definition

The Interior Backup controls where the Blade Plunges into the Blade Plunges into the Fallout (not the Matboard) on the Interior cuts of Non-Oval Openings.

The Interior Backup field is marked with a Black Arrow on the Configuration screen and the Map illustration.Cut is where the Blade Plunges or Retracts from the Fallout (not the Matboard).

If the Interior Backup is cut Too Long, Decrease the Interior Backup.

If the Interior Backup is cut Too Short, Increase the Interior Backup.

The Interior Backup field is marked with a Black Arrow on the Configuration screen and the Map illustration.

Image Added

See: Interior Backup for Openings Configurations

Expand

title	How to Adjust the Interior Backup

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

Image Modified

Image Added

Interior Backup on Drops

Problem:

Panel

panelIconId	atlassian-note
panelIcon	:note:
bgColor	#B3F5FF

If the Interior Backup for Drops cuts Too long or Too short.

Resolution:

Panel

panelIconId	atlassian-note
panelIcon	:note:
bgColor	#B3F5FF

Interior Backup cuts Too Long:
is cut Too Long, Decrease the Interior Backup.

Panel

panelIconId	atlassian-note
panelIcon	:note:
bgColor	#B3F5FF

Interior Backup cuts Too Short:
If the Interior Backup is cut Too Short, Increase the Interior Backup.

Expand

title	Interior Backup on Drops Definition

The Interior Backup controls where the Blade Plunges into the Blade Plunges into the Fallout (not the Matboard) on the Interior cuts of Non-Oval Openings.

The Interior Backup field is marked with a Black Arrow on the Configuration screen and the Map illustration.Cut is where the Blade Plunges or Retracts from the Fallout (not the Matboard).

If the Interior Backup is cut Too Long, Decrease the Interior Backup.

If the Interior Backup is cut Too Short, Increase the Interior Backup.

The Interior Backup field is marked with a Black Arrow on the Configuration screen and the Mapillustration.

Image AddedImage Added
See: Interior Backup for Drops Configurations

Expand

title	How to Adjust the Interior Backup

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

Image Added

Image Modified

Interior Backup on the Outside

Problem:

Panel

panelIconId	atlassian-note
panelIcon	:note:
bgColor	#B3F5FF

Interior Backup for the Outside cuts Too long or Too short.

Resolution:

Panel

panelIconId	atlassian-note
panelIcon	:note:
bgColor	#B3F5FF

Interior Backup cuts Too Long
If the Interior Backup is cut Too Long, Decrease the Interior Backup.

Panel

panelIconId	atlassian-note
panelIcon	:note:
bgColor	#B3F5FF

Interior Backup cuts Too Short:
If the Interior Backup is cut Too Short, Increase the Interior Backup.

Expand

title	Interior Backup on Outsides Definition

The Interior Backup controls where the Blade Plunges into the Blade Plunges into the Fallout (not the Matboard) on the Interior cuts of Non-Oval Openings.

The Interior Backup field is marked with a Black Arrow on the Configuration screen and the Map illustration.Cut is where the Blade Plunges or Retracts from the Fallout (not the Matboard).

If the Interior Backup is cut Too Long, Decrease the Interior Backup.

If the Interior Backup is cut Too Short, Increase the Interior Backup.

The Interior Backup field is marked with a Black Arrow on the Configuration screen and the Mapillustration.

Image AddedImage Added
See: Interior Backup for the Outside Configurations

Expand

title	How to Adjust the Interior Backup

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

Image Added

Image Modified

Interior Backup on V-Grooves

Problem:

Panel

panelIconId	atlassian-note
panelIcon	:note:
bgColor	#B3F5FF

Interior Backup for V-Grooves cuts Too long or Too short.

Resolution:

Panel

panelIconId	atlassian-note
panelIcon	:note:
bgColor	#B3F5FF

If the Interior Backup on the Inside Cut of the V-Groove cuts is cut Too Long:, Decrease the Interior Backup.

Panel

panelIconId	atlassian-note
panelIcon	:note:
bgColor	#B3F5FF

If the Interior Backup on the Inside Cut of the V-Groove cuts is cut Too Short:, Increase the Interior Backup.

Expand

title	Interior Backup on V-Grooves Definition

The V-Groove Interior Backup Backup controls where the Blade Plunges into the Blade Plunges into the Fallout (not the Matboard) on the Interior cuts on the Inside Cut of the V-Groove.

The V-Groove Interior Backup field is marked with a Black Arrow on the Configurations screen and the Map illustration.Cut is where the Blade Plunges or Retracts from the Fallout (not the Matboard).

If the Interior Backup on the Inside Cut of the V-Groove is cut Too Long, Decrease the Interior Backup.

If the Interior Backup on the Inside Cut of the V-Groove is cut Too Short, Increase the Interior Backup.

The V-Groove Interior Backup field is marked with a Black Arrow on the Configuration screen and the Mapillustration.

Image AddedImage Added
See: V-Groove Interior Backup Configurations

Expand

title	How to Adjust the Interior Backup

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

Image Added

Image Modified

Versions Compared

Old Version 36

New Version 37

Key

Interior Backup

on

Openings

Select the Bevel Type for the Interior Backup to be Edited:

Interior Backup on Openings

Problem:

Resolution:

Interior Backup on Drops

Problem:

Resolution:

Interior Backup on the Outside

Problem:

Resolution:

Interior Backup on V-Grooves

Problem:

Resolution: