Versions Compared

Old Version 53

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version 54

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Editing the

Interior Backup on V-Grooves

The V-Groove Interior Backup controls where the Blade Plunges into the Fallout (not the Matboard) on the Interior cuts on the Inside Cut of the V-Groove.

The V-Groove Interior Backup field is marked with a Black Arrow on the Configurations screen and the Map illustration.

Expand
titleV-Groove Interior Backup Definition
Info

  • If the Interior Backup on the Inside Cut of the V-Groove is cut Too Long, Decrease the Interior Backup.

  • If the Interior Backup on the Inside Cut of the V-Groove is cut Too Short, Increase the Interior Backup.

Expand
titleHow to Select the Bevel Type to Edit

Select desired Cartridge Tab. 

Select the desired Bevel Type from Current Bevel Type.

Edit the desired Configuration field.

Image Removed
Select Current Bevel Type-Front of Mat when cutting from the front of the mat.

*The different Opening Bevel Types, including whether it is cutting from the Front or Back, controls the cut direction of the Head, and determines whether the cut is a Backup or an Overcut.

Expand
titleWhen Cutting from the Front
Expand
titleHow to Adjust the Interior Backup

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

Image RemovedImage Added

V-Groove Cut Direction and Cut Order

Tip

  • The Inside of the V-Groove cuts First in a Clockwise direction.

  • These are Internal cuts, which cut into the V-Groove Fallout.

Tip

  • The Outside of the V-Groove cuts Second in a Counter-Clockwise direction.

  • These are External cuts, which cut into the Matboard.

Image Modified
Problem:

V-Groove Interior Backup too Long

Panel
panelIconIdatlassian-note
panelIcon:note:
bgColor#B3F5FF

  • If the Interior Backup on the Inside Cut of the V-Groove cuts Too Long.

Resolution:

Panel
panelIconIdatlassian-note
panelIcon:note:
bgColor#B3F5FF
Expand
titleInterior Backup on V-Groove Interior Backup Grooves Definition

The V-Groove Interior Backup Backup controls where the Blade Plunges into the Blade Plunges into the Fallout (not the Matboard) on the Interior cuts on the Inside Cut of the V-Groove.

The V-Groove Interior Backup field is marked with a Black Arrow on the Configurations screen and the Map illustration.Cut is where the Blade Plunges or Retracts from the Fallout (not the Matboard).  

If the Interior Backup on the Inside Cut of the V-Groove is cut Too Long, Decrease the Interior Backup.If the

The V-Groove Interior Backup field is marked with a Black Arrow on the Inside Cutof the V-Groove is cut Too Short, Increase the Interior Backup. Configurations screen and the Map illustration.

Image AddedImage Added
Expand
titleHow to Adjust the Interior Backup

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

Image AddedImage Modified
Problem:

V-Groove Interior Backup too Short

Panel
panelIconIdatlassian-note
panelIcon:note:
bgColor#B3F5FF

  • If the Interior Backup on the Inside Cut of the V-Groove cuts Too Short.

Resolution:

Panel
panelIconIdatlassian-note
panelIcon:note:
bgColor#B3F5FF
Expand
titleInterior Backup on V-Groove Interior Backup Grooves Definition

The V-Groove Interior Backup Backup controls where the Blade Plunges into the Blade Plunges into the Fallout (not the Matboard) on the Interior cuts on the Inside Cut of the V-Groove.

The V-Groove Interior Backup field is marked with a Black Arrow on the Configurations screen and the Map illustration.Cut is where the Blade Plunges or Retracts from the Fallout (not the Matboard).  

If the Interior Backup on the Inside Cut of the V-Groove is cut Too LongShort, Decrease Increase the Interior Backup.If the

The V-Groove Interior Backup field is marked with a Black Arrow on the Inside Cutof the V-Groove is cut Too Short, Increase the Interior Backup. Configurations screen and the Map illustration.

Image AddedImage Added
Expand
titleHow to Adjust the Interior Backup

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

Image AddedImage Modified