Versions Compared

Old Version 40

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version 41

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
The Corner Pause setting in Configurations is the amount of time, in milliseconds, to pause the application of the Non-Blade Tools between segments.

Editing the Corner Pause

Expand
titleCorner Pause Definition

Corner Pause on Non-Blade Cartridges

Info

  • The Non-Blade Tool

is Tearing in

  • Tears the Corners

of the segmentsPausing Too Long

  • pausing too long in the Corners

of the segments
Expand
titleHow to Select the Bevel Type to Edit

Select desired Cartridge Tab. 

Select the desired Bevel Type from Current Bevel Type.

Edit the desired Configuration field.

Image Removed
Expand
titleHow to Adjust the Corner Pause

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

Image Modified

Tool is Tearing the Mat Surface

Problem:

Panel
panelIconIdatlassian-note
panelIcon:note:
bgColor#B3F5FF

  • Tool is Tearing in the Corners. 

Resolution:

Panel
panelIconIdatlassian-note
panelIcon:note:
bgColor#B3F5FF

  • The Non-Blade Tool is Tearing in Tears the Corners:, Increase the Corner Pause. 

  • Check the Blade Depth to make sure it is not too deep.

Panel
panelIconIdatlassian-note
panelIcon:note:
bgColor#B3F5FF

  • The Non-Blade Tool is Pausing Too Long pausing too long in the Corners:, Decrease the Corner Pause. 

Expand
titleCorner Pause General Definition

The Corner Pause setting in Configurations is the amount of time, in milliseconds, to pause the application of the Non-Blade Tools between segments.

The Non-Blade Tool is Tearing in Tears the Corners of the segments, Increase the Corner Pause. 

The Non-Blade Tool is Pausing Too Long pausing too long in the Corners of the segments, Decrease the Corner Pause. 

Image Added
Expand
titleHow to Adjust the Corner Pause

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

Image Modified