Versions Compared

Version Old Version 30 New Version 31
Changes made by

dani.simmonds

dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Tool Line Too Far Up

Panel
panelIconIdatlassian-note
panelIcon:note:
bgColor#B3F5FF
Expand
titleVertical Adjustment for Non-Blade Cartridges General Definition

The Vertical Adjustment defines the global Vertical placement of objects applied with the Non-Blade Tool Cartridges.

If the Non-Blade Tool line is applied Too Far Up Vertically, Decreasethe /wiki/spaces/FrameShop8x/pages/1942514721 Vertical Adjustment.

If the Non-Blade Tool line is applied Too Far Down Vertically, Increase the /wiki/spaces/FrameShop8x/pages/1942514721 Vertical Adjustment.

Expand
titleHow to Adjust the Vertical Adjustment

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

Tool Line Too Far Down

Panel
panelIconIdatlassian-note
panelIcon:note:
bgColor#B3F5FF
Expand
titleVertical Adjustment for Non-Blade Cartridges General Definition

The Vertical Adjustment defines the global Vertical placement of objects applied with the Non-Blade Tool Cartridges.

If the Non-Blade Tool line is applied Too Far Up Vertically, Decreasethe /wiki/spaces/FrameShop8x/pages/1942514721 Vertical Adjustment.

If the Non-Blade Tool line is applied Too Far Down Vertically, Increase the /wiki/spaces/FrameShop8x/pages/1942514721 Vertical Adjustment.

Expand
titleHow to Adjust the Vertical Adjustment

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

Info