Versions Compared

Version Old Version 29 New Version 30
Changes made by

dani.simmonds

dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Vertical Adjustment for Non-Blade Cartridges Definition

Expand
titleVertical Adjustment Definition
The Vertical Adjustment defines the global Vertical placement of objects applied with the Non-Blade

Tool

Cartridges.

If the Tool line is applied too far Up, Decrease the Vertical Adjustment.

If the Tool line is applied too far Down, Increase the Vertical Adjustment.

Image Removed
Expand
titleHow to Adjust the Vertical Adjustment

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

Select the Tool and Type

Expand
titleHow to Select the Bevel Type to Edit

Select desired Cartridge Tab. 

Select the desired Bevel Type from Current Bevel Type.

Edit the desired Configuration field.

Image Removed

Tool Line Too Far Up

Problem:

Panel
panelIconIdatlassian-note
panelIcon:note:
bgColor#B3F5FF

  • If the Non-Blade Tool Lineline is applied too far Up.

Resolution:

Panel
panelIconIdatlassian-note
panelIcon:note:
bgColor#B3F5FF
Expand
titleVertical Adjustment for Non-Blade Cartridges General Definition

The Vertical Adjustment defines the global Vertical placement of objects applied with the Non-Blade Tool Cartridges.

If the Non-Blade Tool line is applied too far Too Far Up Vertically, Decreasethe Vertical Adjustment /wiki/spaces/FrameShop8x/pages/1942514721.

If the Non-Blade Tool line is applied too far Too Far Down Vertically, Increase the Vertical Adjustment /wiki/spaces/FrameShop8x/pages/1942514721.

Image AddedImage Added
Expand
titleHow to Adjust the Vertical Adjustment

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

Image AddedImage Modified
Problem:

Tool Line Too Far Down

Panel
panelIconIdatlassian-note
panelIcon:note:
bgColor#B3F5FF

  • If the Non-Blade Tool Lineline is applied too far Down.

Resolution:

Panel
panelIconIdatlassian-note
panelIcon:note:
bgColor#B3F5FF
Expand
titleVertical Adjustment for Non-Blade Cartridges General Definition

The Vertical Adjustment defines the global Vertical placement of objects applied with the Non-Blade Tool Cartridges.

If the Non-Blade Tool line is applied too far Too Far Up Vertically, Decreasethe Vertical Adjustment /wiki/spaces/FrameShop8x/pages/1942514721.

If the Non-Blade Tool line is applied too far Too Far Down Vertically, Increase the Vertical Adjustment. /wiki/spaces/FrameShop8x/pages/1942514721.

Image AddedImage Added
Expand
titleHow to Adjust the Vertical Adjustment

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

Image AddedImage Modified
Info