Versions Compared

Old Version 32

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version 33

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

V-Groove Cuts too Far Up (Not Cutting the Outside)

Panel
panelIconIdatlassian-note
panelIcon:note:
bgColor#B3F5FF
Expand
titleVertical Home for V-Grooves Definition

The Vertical Home defines the global Vertical placement of objects cut with the Blade Cartridges.

If the V-Groove is cut Too Far Up Vertically, Decrease the /wiki/spaces/FrameShop8x/pages/1942498125 Vertical Home.

If the V-Groove is cut Too Far Down Vertically, Increase the /wiki/spaces/FrameShop8x/pages/1942498125 Vertical Home.

See: /wiki/spaces/FrameShop8x/pages/1942498228
Expand
titleHow to Adjust the Vertical Home

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

V-Groove Cuts too Far Down (Not Cutting the Outside)

Panel
panelIconIdatlassian-note
panelIcon:note:
bgColor#B3F5FF
Expand
titleVertical Home for V-Grooves Definition

The Vertical Home defines the global Vertical placement of objects cut with the Blade Cartridges.

If the V-Groove is cut Too Far Up Vertically, Decrease the /wiki/spaces/FrameShop8x/pages/1942498125 Vertical Home.

If the V-Groove is cut Too Far Down Vertically, Increase the /wiki/spaces/FrameShop8x/pages/1942498125 Vertical Home.

See: /wiki/spaces/FrameShop8x/pages/1942498228
Expand
titleHow to Adjust the Vertical Home

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

Info