Reverse Bevel Reverse Bevel Opening Definition |
---|
Panel |
---|
panelIconId | atlassian-plus |
---|
panelIcon | :plus: |
---|
panelIconText | :plus: |
---|
bgColor | #FFFAE6 |
---|
| |
|
when the Angle of the blade cuts the Matboard surface so it Slants Under the surface of the Matboard, and the Matboard Core is Not Seen from the front.Cutting From the Back will cut with the face of the mat toward the CMC Board, and can be selected on the Cutting Preview.
The Bevel Type is the Angle that the blade cuts on the Matboard/Fallout surface when it is not cut at a 90° Right Angle.
Select Reverse Bevelfrom the Current Bevel Type dropdown control to edit this configuration Expand |
---|
title | Reverse Bevel Opening General Full Definition |
---|
| The Reverse Bevel Opening is |
|
when the Angle of the blade cuts the Matboard surface so it Slants Under the surface of the Matboard, and the Matboard Core is Not Seen created by cutting into the matboard surface with the blade angled at 45°/52°, thereby slanting the bevel under the matboard surface. The matboard core is not visible from the front. |
|
Cutting From the Back will cut with the face of the mat toward the CMC Board, and can be selected on the Cutting Preview.
is the Angle that refers to the angle at which the blade cuts |
|
on Matboard/Fallout surface of the matboard when it |
|
is not cut at a 90° Right Angledeviates from the 90° right angle cut. Select Reverse Bevel or Reverse Bevel-Front of Mat from the Current Bevel Type dropdown control to edit this configuration. |
|
infoImage AddedImage Added See |
|
Also: Bevel Type ExamplesImage Removed | Reverse Bevel - Front of Mat Definition |
---|
Panel |
---|
panelIconId | atlassian-plus |
---|
panelIcon | :plus: |
---|
panelIconText | :plus: |
---|
bgColor | #FFFAE6 |
---|
|
The Reverse Bevel - Front of Mat is when the Angle of the blade cuts the Matboard surface so it Slants Under the surface of the Matboard, and the Matboard Core is Not Seen from the front.
Cutting From the Front will cut with the face of the mat toward the operator, and can be selected on the Cutting Preview or by cutting a Cut-From-Front element such as a Deboss or V-Groove.
The Bevel Type is the Angle that the blade cuts on the Matboard/Fallout surface when it is not cut at a 90° Right Angle.
Select Reverse Bevel - Front of Matfrom the Current Bevel Type dropdown control to edit this configuration. Expand |
---|
title | Reverse Bevel - Front of Mat Definition |
---|
|
The Reverse Bevel - Front of Mat is when the Angle of the blade cuts the Matboard surface so it Slants Under the surface of the Matboard, and the Matboard Core is Not Seen from the front.
Cutting From the Front will cut with the face of the mat toward the operator, and can be selected on the Cutting Preview or by cutting a Cut-From-Front element such as a Deboss or V-Groove.
The Bevel Type is the Angle that the blade cuts on the Matboard/Fallout surface when it is not cut at a 90° Right Angle.
Select Reverse Bevel - Front of Matfrom the Current Bevel Type dropdown control to edit this configuration Expand |
---|
title | How to Adjust the Configurations |
---|
| When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times. Click OK and do another test cut. Continue making adjustments until the desired outcome is achieved. |
|
Image RemovedImage Added |