Versions Compared

Old Version 26

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version 27

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

V-Groove Exterior Backup Definition

Panel
panelIconIdatlassian-plus
panelIcon:plus:
panelIconText:plus:
bgColor#FFFAE6

  • The V-Groove Exterior

Backup 

  • Backup controls where

the Blade Plunges into

  • the Blade Plunges into the Matboard (not the Fallout) on the Exterior cuts of the Outside Cut of the

Non-Oval

  • V-Groove.

  • The

V-Groove

  • Exterior

Backup field is marked with a Green Arrow on the Configurations screen and the Map illustration.

  • Cut is where the Blade Plunges or Retracts from the Matboard (not the Fallout).    

    • If the Exterior Backup on the Outside Cut of the

Non-Oval

    • V-Groove is cut Too Long, Decrease the Exterior Backup.

    • If the Exterior Backup on the Outside Cut of the

Non-Oval
Expand
titleV-Groove Exterior Backup Full Definition

The V-Groove Exterior

Backup 

Backup controls where

the Blade Plunges into

the Blade Plunges into the Matboard (not the Fallout) on the Exterior cuts of the Outside Cut of the

Non-Oval

V-Groove.

The

V-Groove

Exterior

Backup field is marked with a Green Arrow on the Configurations screen and the Map illustration.

Cut is where the Blade Plunges or Retracts from the Matboard (not the Fallout).  

If the Exterior Backup on the Outside Cut of the

Non-Oval

V-Groove is cut Too Long, Decrease the Exterior Backup.

If the Exterior Backup on the Outside Cut of the

Non-Oval

V-Groove is cut Too Short, Increase the Exterior Backup.

The V-Groove Exterior Backup field is marked with a Green Arrow on the Configurations screen and the Map illustration.

info
Image AddedImage Added

See: V-Groove Exterior Backup

.Image Removed

Configurations

Expand
titleHow to Adjust the Configurations

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

Image Added