Versions Compared

Old Version 59

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version 60

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Flare Definition

Panel
panelIconIdatlassian-plus
panelIcon:plus:
panelIconText:plus:
bgColor#FFFAE6

  • A Flare in

a Non-Oval

  • an Opening is where the corners Curve Away from the Opening.

    • If the Opening has a Flare, Decrease the Rotation.

Expand
titleFlare General Definition

A Flare is where the corners Curve Away from the object.

If the object has a Flare, Decrease the Rotation.

Image AddedImage Added

See: Rotation Configurations

Expand
titleFlare on Opening Definition

A Flare in an Opening is where the corners Curve Away from the

opening.

The Rotation controls for Swoops and Flares in Non-Oval Openings.

If the Non-Oval Opening cuts with

Opening.

If the Opening has a Flare, Decrease the Rotation.

Image AddedImage Added

See: Rotation Configurations

Expand
titleFlare on Drops Definition

A Flare in a Drop is where the corners Curve Away from the Drop.

If the Drop has a Flare, Decrease the Rotation.

Image AddedImage Added

See: Rotation Configurations

Expand
titleFlare on the Outside Definition

A Flare in

aNon-OvalOpening

the Outside is where the corners Curve Away from the Outside.

If the Outside has a Flare, Decrease the Rotation.

Image AddedImage Added

See: Rotation Configurations

Expand
titleOutside V-Groove Flare Definition

A Flare on the Outside cut of the V-Groove is where the corners Curve Away from the

opening.

The Rotation controls for Swoops and Flares in Non-Oval Openings.

If the Non-Oval Opening cuts with a Flare, Decrease the Rotation

V-Groove.

If the Outside cut of the V-Groove has a Flare, Increase the Outside Rotation.

Image AddedImage Added

See: Outside Rotation Configurations

Expand
titleInside V-Groove Flare Definition

A Flare on the Inside cut of the V-Groove is where the corners Curve Away from the V-Groove.

If the Inside cut of the V-Groove has a Flare, Decrease the Inside Rotation.

Image AddedImage Added

See: Inside Rotation Configurations

Expand
titleFlare in Crease Definition

A Flare in a Crease is where the corners Curve Away from the Crease.

If the Crease has a Flare, Decrease the Rotation.

Image AddedImage Added

See: Rotation Configurations

Expand
titleHow to Adjust the Configurations

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

Info
Image Modified