| View file | ||
|---|---|---|
|
Cutting V-Grooves on the Eclipse Pro | |
|---|---|
1. If your design contains a V-Groove, you will notice that the MatDesigner will display that it will cut that layer and any openings on that layer from the front of the mat. |  |
2. On the machine, place a mat board with the front of the board showing and turn on the clamps. 3. Click Cut. You will see a prompt to change the Blade Depth. |  |
4 To change the Blade Depth for the V-Groove, lift the locking lever and pivot the cutting Head out and down. Press the V-Groove Adjuster to the Left. Replace the cutting Head and lever and tighten the thumb-screw. 5. Click OK. The CMC will cut the V-Groove and return to the home position. |  |
6. You will be prompted to change the Blade Depth back to mat depth (i.e., return the V-Groove Adjuster to the Right). After returning the V-Groove Adjuster to the Right, Click OK to cut the openings. When the machine stops, turn off the clamps and remove the mat. |  |