Page Comparison

The screen indicator will display if you are cutting from the back  or the front  of the mat.

Place the matboard on the CMC with the front of the mat facing the board when cutting from the back or  and with the front of the mat facing the user when cutting from the front. 

Click the Cut button on the Cutting Preview screen.

If the motors on the CMC are disengaged, the user will be prompted to Align the Head. 

• Click here for instructions on Aligning the Head on the CMC Z1 CMC. 

• Click here for instructions on Aligning the Head on the CMC 9000z CMC. 

• Click here for instructions on Aligning the Head on the CMC 9000 CMC. 

• Click here for instructions on Aligning the Headon the CMC 8000 CMC. 

If the current layer uses a different blade cartridge or is a different mat thickness than the last layer cut, the user will be prompted to change the cartridge and/or blade depth. 

Change the Blade Cartridge and Blade Depth as prompted, and click OK. 

After the Head is Aligned, the desired Blade Cartridge inserted and the Blade Depth adjusted as prompted, the CMC will begin to cut.