Versions Compared

Version Old Version 51 New Version 52
Changes made by

dani.simmonds

dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Horizontal Home for Openings Definition

Expand
titleHorizontal Home Definition

The Horizontal Home defines the global Horizontal placement of objects cut with the Blade Cartridges.

If the Opening is cut too far Left, Increase the Horizontal Home.

If the Opening is cut too far Right, Decrease the Horizontal Home.

Expand
titleHow to Adjust the Horizontal Home

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

Opening Cuts too Far to the Right when Not Cutting the Outside: Horizontal Border too Big

Problem:

Panel
panelIconIdatlassian-note
panelIcon:note:
bgColor#B3F5FF

  • Opening cuts too far to the Right Horizontally.

Resolution:

Panel
panelIconIdatlassian-note
panelIcon:note:
bgColor#B3F5FF
Expand
titleHorizontal Home Definition

The Horizontal Home defines the global Horizontal placement of objects cut with the Blade Cartridges.

If the Opening is cut too far Left, Increase the Horizontal Home.

If the Opening is cut too far Right, Decrease the Horizontal Home.

Expand
titleHow to Adjust the Horizontal Home

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

Opening Cuts too Far to the Left when Not Cutting the Outside: Horizontal Border too Small

Problem:

Panel
panelIconIdatlassian-note
panelIcon:note:
bgColor#B3F5FF

  • Opening cuts too far Left Horizontally.

Resolution:

Panel
panelIconIdatlassian-note
panelIcon:note:
bgColor#B3F5FF
Expand
titleHorizontal Home Definition

The Horizontal Home defines the global Horizontal placement of objects cut with the Blade Cartridges.

If the Opening is cut too far Left, Increase the Horizontal Home.

If the Opening is cut too far Right, Decrease the Horizontal Home.

Expand
titleHow to Adjust the Horizontal Home

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

...