Cartridges Involved |
|---|
This Configuration element involves the following Cartridges. | Info |
|---|
Note: Not all cartridges are available for all CMC models. |
| 
Image RemovedExterior Overcut Definition |
|---|
| Expand |
|---|
| title | Exterior Overcut Definition |
|---|
| The Exterior Overcut controls where the Blade Retracts from the Matboard (not the Fallout) on the Exterior cut. The Exterior Overcut field is marked with a Red Arrow on the Configuration screen and the Map illustration. If the Exterior Overcut is cut Too Long, Decrease the Exterior Overcut. If the Exterior Overcut is cut Too Short, Increase the Exterior Overcut. |
| Expand |
|---|
| title | How to Adjust the Exterior Overcut |
|---|
| When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times. Click OK and do another test cut. Continue making adjustments until the desired outcome is achieved. |
| |
Select the Bevel Type for the Exterior Overcut to be Edited: |
|---|
Problem:| Panel |
|---|
| panelIconId | atlassian-note |
|---|
| panelIcon | :note: |
|---|
| bgColor | #B3F5FF |
|---|
| |
Resolution:| Panel |
|---|
| panelIconId | atlassian-note |
|---|
| panelIcon | :note: |
|---|
| bgColor | #B3F5FF |
|---|
| |
| Expand |
|---|
| title | Exterior Overcut Definition |
|---|
| The Exterior Overcut controls where the Blade Retracts from the Matboard (not the Fallout) on the Exterior cut. The Exterior Overcut field is marked with a Red Arrow on the Configuration screen and the Map illustration. If the Exterior Overcut is cut Too Long, Decrease the Exterior Overcut. If the Exterior Overcut is cut Too Short, Increase the Exterior Overcut. |
| Expand |
|---|
| title | How to Adjust the Exterior Overcut |
|---|
| When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times. Click OK and do another test cut. Continue making adjustments until the desired outcome is achieved. |
| |
Problem:| Panel |
|---|
| panelIconId | atlassian-note |
|---|
| panelIcon | :note: |
|---|
| bgColor | #B3F5FF |
|---|
| |
Resolution:| Panel |
|---|
| panelIconId | atlassian-note |
|---|
| panelIcon | :note: |
|---|
| bgColor | #B3F5FF |
|---|
| |
| Expand |
|---|
| title | Exterior Overcut Definition |
|---|
| The Exterior Overcut controls where the Blade Retracts from the Matboard (not the Fallout) on the Exterior cut. The Exterior Overcut field is marked with a Red Arrow on the Configuration screen and the Map illustration. If the Exterior Overcut is cut Too Long, Decrease the Exterior Overcut. If the Exterior Overcut is cut Too Short, Increase the Exterior Overcut. |
| Expand |
|---|
| title | How to Adjust the Exterior Overcut |
|---|
| When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times. Click OK and do another test cut. Continue making adjustments until the desired outcome is achieved. |
| |
Problem:| Panel |
|---|
| panelIconId | atlassian-note |
|---|
| panelIcon | :note: |
|---|
| bgColor | #B3F5FF |
|---|
| |
Resolution:| Panel |
|---|
| panelIconId | atlassian-note |
|---|
| panelIcon | :note: |
|---|
| bgColor | #B3F5FF |
|---|
| |
| Expand |
|---|
| title | Exterior Overcut Definition |
|---|
| The Exterior Overcut controls where the Blade Retracts from the Matboard (not the Fallout) on the Exterior cut. The Exterior Overcut field is marked with a Red Arrow on the Configuration screen and the Map illustration. If the Exterior Overcut is cut Too Long, Decrease the Exterior Overcut. If the Exterior Overcut is cut Too Short, Increase the Exterior Overcut. |
| Expand |
|---|
| title | How to Adjust the Exterior Overcut |
|---|
| When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times. Click OK and do another test cut. Continue making adjustments until the desired outcome is achieved. |
| |
Problem:| Panel |
|---|
| panelIconId | atlassian-note |
|---|
| panelIcon | :note: |
|---|
| bgColor | #B3F5FF |
|---|
| |
Resolution:| Panel |
|---|
| panelIconId | atlassian-note |
|---|
| panelIcon | :note: |
|---|
| bgColor | #B3F5FF |
|---|
| |
| Expand |
|---|
| title | V-Groove Exterior Overcut Definition |
|---|
| The V-Groove Exterior Overcut controls where the Blade Retracts from the Matboard (not the Fallout)on the Exterior cuts of the Outside Cut of the V-Groove. The V-Groove Exterior Overcut field is marked with a Red Arrow on the Configurations screen and the Map illustration. If the Exterior Overcut on the Outside Cut of the V-Groove is cut Too Long, Decrease the Exterior Overcut. If the Exterior Overcut on the Outside Cut of the V-Groove is cut Too Short, Increase the Exterior Overcut. |
| Expand |
|---|
| title | How to Adjust the Exterior Overcut |
|---|
| When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times. Click OK and do another test cut. Continue making adjustments until the desired outcome is achieved. |
| |
Problem:| Panel |
|---|
| panelIconId | atlassian-note |
|---|
| panelIcon | :note: |
|---|
| bgColor | #B3F5FF |
|---|
| |
Resolution:| Panel |
|---|
| panelIconId | atlassian-note |
|---|
| panelIcon | :note: |
|---|
| bgColor | #B3F5FF |
|---|
| |
| Expand |
|---|
| title | Exterior Overcut Definition |
|---|
| The Exterior Overcut controls where the Blade Retracts from the Matboard (not the Fallout) on the Exterior cut. The Exterior Overcut field is marked with a Red Arrow on the Configuration screen and the Map illustration. If the Exterior Overcut is cut Too Long, Decrease the Exterior Overcut. If the Exterior Overcut is cut Too Short, Increase the Exterior Overcut. |
| Expand |
|---|
| title | How to Adjust the Exterior Overcut |
|---|
| When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times. Click OK and do another test cut. Continue making adjustments until the desired outcome is achieved. |
| |