Cartridges Involved |
---|
This Configuration element involves the following Cartridges. Info |
---|
Note: Not all cartridges are available for all CMC models. |
| Image RemovedEditing the Interior Backup on the Outsides |
---|
Expand |
---|
title | Interior Backup Definition |
---|
| The Interior Backup controls where the Blade Plunges into the Fallout (not the Matboard) on the Interior cuts of Non-Oval Openings. The Interior Backup field is marked with a Black Arrow on the Configuration screen and the Map illustration. If the Interior Backup is cut Too Long, Decrease the Interior Backup. If the Interior Backup is cut Too Short, Increase the Interior Backup. |
Selecting the Outside Interior Backup in the Configurations Expand |
---|
title | When Cutting from the Front |
---|
| Select the desired Cartridge Tab. Select Current Bevel Type-Front of Mat when cutting from the front of the mat. *The different Opening Bevel Types, including whether it is cutting from the Front or Back, controls the cut direction of the Head, and determines whether the cut is a Backup or an Overcut. |
Expand |
---|
title | How to Adjust the Interior Backup |
---|
| When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times. Click OK and do another test cut. Continue making adjustments until the desired outcome is achieved. |
| |
|
---|
Problem: Panel |
---|
panelIconId | atlassian-note |
---|
panelIcon | :note: |
---|
bgColor | #B3F5FF |
---|
| |
Resolution: Panel |
---|
panelIconId | atlassian-note |
---|
panelIcon | :note: |
---|
bgColor | #B3F5FF |
---|
| |
Expand |
---|
title | Interior Backup Definition |
---|
| The Interior Backup controls where the Blade Plunges into the Fallout (not the Matboard) on the Interior cuts of Non-Oval Openings. The Interior Backup field is marked with a Black Arrow on the Configuration screen and the Map illustration. If the Interior Backup is cut Too Long, Decrease the Interior Backup. If the Interior Backup is cut Too Short, Increase the Interior Backup. |
Expand |
---|
title | How to Adjust the Interior Backup |
---|
| When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times. Click OK and do another test cut. Continue making adjustments until the desired outcome is achieved. |
| |
Outside Interior Backup Too Short |
---|
Problem: Panel |
---|
panelIconId | atlassian-note |
---|
panelIcon | :note: |
---|
bgColor | #B3F5FF |
---|
| |
Resolution: Panel |
---|
panelIconId | atlassian-note |
---|
panelIcon | :note: |
---|
bgColor | #B3F5FF |
---|
| |
Expand |
---|
title | Interior Backup Definition |
---|
| The Interior Backup controls where the Blade Plunges into the Fallout (not the Matboard) on the Interior cuts of Non-Oval Openings. The Interior Backup field is marked with a Black Arrow on the Configuration screen and the Map illustration. If the Interior Backup is cut Too Long, Decrease the Interior Backup. If the Interior Backup is cut Too Short, Increase the Interior Backup. |
Expand |
---|
title | How to Adjust the Interior Backup |
---|
| When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times. Click OK and do another test cut. Continue making adjustments until the desired outcome is achieved. |
| |