Cartridges Involved |
|---|
This Configuration element involves the following Cartridges. | Info |
|---|
Note: Not all cartridges are available for all CMC models. |
| 
Image RemovedHorizontal Home for Openings Definition |
|---|
| Expand |
|---|
| title | Horizontal Home Definition |
|---|
| The Horizontal Home defines the global Horizontal placement of objects cut with the Blade Cartridges. If the Opening is cut too far Left, Increase the Horizontal Home. If the Opening is cut too far Right, Decrease the Horizontal Home. |
| Expand |
|---|
| title | How to Adjust the Horizontal Home |
|---|
| When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times. Click OK and do another test cut. Continue making adjustments until the desired outcome is achieved. |
|
Opening Cuts too Far to the Right when Not Cutting the Outside: Horizontal Border too Big |
|---|
Problem:| Panel |
|---|
| panelIconId | atlassian-note |
|---|
| panelIcon | :note: |
|---|
| bgColor | #B3F5FF |
|---|
| |
Resolution:| Panel |
|---|
| panelIconId | atlassian-note |
|---|
| panelIcon | :note: |
|---|
| bgColor | #B3F5FF |
|---|
| |
| Expand |
|---|
| title | Horizontal Home Definition |
|---|
| The Horizontal Home defines the global Horizontal placement of objects cut with the Blade Cartridges. If the Opening is cut too far Left, Increase the Horizontal Home. If the Opening is cut too far Right, Decrease the Horizontal Home. |
| Expand |
|---|
| title | How to Adjust the Horizontal Home |
|---|
| When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times. Click OK and do another test cut. Continue making adjustments until the desired outcome is achieved. |
| |
Opening Cuts too Far to the Left when Not Cutting the Outside: Horizontal Border too Small |
|---|
Problem:| Panel |
|---|
| panelIconId | atlassian-note |
|---|
| panelIcon | :note: |
|---|
| bgColor | #B3F5FF |
|---|
| |
Resolution:| Panel |
|---|
| panelIconId | atlassian-note |
|---|
| panelIcon | :note: |
|---|
| bgColor | #B3F5FF |
|---|
| |
| Expand |
|---|
| title | Horizontal Home Definition |
|---|
| The Horizontal Home defines the global Horizontal placement of objects cut with the Blade Cartridges. If the Opening is cut too far Left, Increase the Horizontal Home. If the Opening is cut too far Right, Decrease the Horizontal Home. |
| Expand |
|---|
| title | How to Adjust the Horizontal Home |
|---|
| When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times. Click OK and do another test cut. Continue making adjustments until the desired outcome is achieved. |
| |
...