Cartridges Involved |
|---|
This Configuration element involves the following Cartridges. | Info |
|---|
Note: Not all cartridges are available for all CMC models. |
| 
Image RemovedVertical Adjustment for Non-Blade Cartridges Definition |
|---|
| Expand |
|---|
| title | Vertical Adjustment Definition |
|---|
| The Vertical Adjustment defines the global Vertical placement of objects applied with the Non-Blade Tool Cartridges. If the Tool line is applied too far Up, Decrease the Vertical Adjustment. If the Tool line is applied too far Down, Increase the Vertical Adjustment. |
| Expand |
|---|
| title | How to Adjust the Vertical Adjustment |
|---|
| When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times. Click OK and do another test cut. Continue making adjustments until the desired outcome is achieved. |
|
|
|---|
Problem:| Panel |
|---|
| panelIconId | atlassian-note |
|---|
| panelIcon | :note: |
|---|
| bgColor | #B3F5FF |
|---|
| |
Resolution:| Panel |
|---|
| panelIconId | atlassian-note |
|---|
| panelIcon | :note: |
|---|
| bgColor | #B3F5FF |
|---|
| |
| Expand |
|---|
| title | Vertical Adjustment Definition |
|---|
| The Vertical Adjustment defines the global Vertical placement of objects applied with the Non-Blade Tool Cartridges. If the Tool line is applied too far Up, Decrease the Vertical Adjustment. If the Tool line is applied too far Down, Increase the Vertical Adjustment. |
| Expand |
|---|
| title | How to Adjust the Vertical Adjustment |
|---|
| When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times. Click OK and do another test cut. Continue making adjustments until the desired outcome is achieved. |
| |
|
|---|
Problem:| Panel |
|---|
| panelIconId | atlassian-note |
|---|
| panelIcon | :note: |
|---|
| bgColor | #B3F5FF |
|---|
| |
Resolution:| Panel |
|---|
| panelIconId | atlassian-note |
|---|
| panelIcon | :note: |
|---|
| bgColor | #B3F5FF |
|---|
| |
| Expand |
|---|
| title | Vertical Adjustment Definition |
|---|
| The Vertical Adjustment defines the global Vertical placement of objects applied with the Non-Blade Tool Cartridges. If the Tool line is applied too far Up, Decrease the Vertical Adjustment. If the Tool line is applied too far Down, Increase the Vertical Adjustment. |
| Expand |
|---|
| title | How to Adjust the Vertical Adjustment |
|---|
| When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times. Click OK and do another test cut. Continue making adjustments until the desired outcome is achieved. |
| |
...