Versions Compared

Old Version 29

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version 30

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Cartridges Involved

This Configuration element involves the following Cartridges.

Info

Note: Not all cartridges are available for all CMC models.

Interior Backup Definition

Adjusting the Interior Backup

Tip

  • To adjust, click plusPlus/minus Minus on the desired field about five times.

  • Click OK and do another test cut.

  • Continue making adjustments until the desired outcome is achieved.

Expand
titleInterior Backup Definition

The Interior Backup controls where the Blade Plunges into the Fallout (not the Matboard) on the Interior cuts of Non-Oval Openings.

The Interior Backup field is marked with a Black Arrow on the Configuration screen and the Map illustration.

If the Interior Backup is cut Too Long, Decrease the Interior Backup.

If the Interior Backup is cut Too Short, Increase the Interior Backup.

Select the Bevel Type for the Interior Backup to be Edited:

Interior Backup on Openings

Problem:

Panel
panelIconIdatlassian-note
panelIcon:note:
bgColor#B3F5FF

  • The Interior Backup on Openings is cutting cuts Too long or Too short.

Tip

  • Normal Bevel

  • Reverse Bevel

  • Normal Bevel-Front of Mat

  • Reverse Bevel-Front of Mat

Resolution:

Panel
panelIconIdatlassian-note
panelIcon:note:
bgColor#B3F5FF

  • If the Interior Backup is cut cuts Too Long, :

  • If the Interior Backup is cut cuts Too Short, :

Expand
titleInterior Backup Definition

The Interior Backup controls where the Blade Plunges into the Fallout (not the Matboard) on the Interior cuts of Non-Oval Openings.

The Interior Backup field is marked with a Black Arrow on the Configuration screen and the Map illustration.

If the Interior Backup is cut Too Long, Decrease the Interior Backup.

If the Interior Backup is cut Too Short, Increase the Interior Backup.

Interior Backup on Drops  

Problem:

Panel
panelIconIdatlassian-note
panelIcon:note:
bgColor#B3F5FF

  • The Interior Backup for Drops is cutting cuts Too long or Too short.

Tip

  • Normal Drop

  • Reverse Drop

  • Normal Drop-Front of Mat

  • Reverse Drop-Front of Mat

Resolution:

Panel
panelIconIdatlassian-note
panelIcon:note:
bgColor#B3F5FF

  • If the Interior Backup is cut cuts Too Long, :

  • If the Interior Backup is cut cuts Too Short, :

Expand
titleInterior Backup Definition

The Interior Backup controls where the Blade Plunges into the Fallout (not the Matboard) on the Interior cuts of Non-Oval Openings.

The Interior Backup field is marked with a Black Arrow on the Configuration screen and the Map illustration.

If the Interior Backup is cut Too Long, Decrease the Interior Backup.

If the Interior Backup is cut Too Short, Increase the Interior Backup.

Interior Backup on the Outside

Problem:

Panel
panelIconIdatlassian-note
panelIcon:note:
bgColor#B3F5FF

  • The Interior Backup for the Outside is cutting cuts Too long or Too short.

Tip

  • Outside

  • Outside-Front of Mat

Resolution:

Panel
panelIconIdatlassian-note
panelIcon:note:
bgColor#B3F5FF

  • If the Interior Backup is cut cuts Too Short, :

Expand
titleInterior Backup Definition

The Interior Backup controls where the Blade Plunges into the Fallout (not the Matboard) on the Interior cuts of Non-Oval Openings.

The Interior Backup field is marked with a Black Arrow on the Configuration screen and the Map illustration.

If the Interior Backup is cut Too Long, Decrease the Interior Backup.

If the Interior Backup is cut Too Short, Increase the Interior Backup.

Interior Backup on V-Grooves 

Problem:

Panel
panelIconIdatlassian-note
panelIcon:note:
bgColor#B3F5FF

  • The Interior Backup for V-Grooves is cutcuts Too long or Too short.

Tip

  • V-Grooves

Resolution:

Panel
panelIconIdatlassian-note
panelIcon:note:
bgColor#B3F5FF

  • If the Interior Backup on the Inside Cut of the V-Groove is cut cuts Too Long, :

  • If the Interior Backup on the Inside Cut of the V-Groove is cut cuts Too Short, :

Expand
titleInterior Backup Definition

The V-Groove Interior Backup controls where the Blade Plunges into the Fallout (not the Matboard) on the Interior cuts on the Inside Cut of the V-Groove.

The V-Groove Interior Backup field is marked with a Black Arrow on the Configurations screen and the Map illustration.

If the Interior Backup on the Inside Cutof the V-Groove is cut Too Long, Decrease the Interior Backup.

If the Interior Backup on the Inside Cutof the V-Groove is cut Too Short, Increase the Interior Backup.