Versions Compared

Old Version 54

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version 55

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Cartridges Involved

This Configuration element involves the following Cartridges.

Info

Note: Not all cartridges are available for all CMC models.

Exterior Backup on Drops Definition

Expand
titleExterior Backup Definition

The Exterior Backup controls where the Blade Plunges into the Matboard (not the Fallout) on the Exterior cut. 

The Exterior Backup field is marked with a Green Arrow on the Configuration screen and the Map illustration.

If the Exterior Backup is cut Too Short, it can leave a Hook in the corner.

If the Exterior Backup is cut Too Long, Decrease the Exterior Backup.

If the Exterior Backup is cut Too Short, Increase the Exterior Backup.

Adjusting the Exterior Backup

Tip

  • To adjust, click Plus/Minus on the desired field about five times.

  • Click OK and do another test cut.

  • Continue making adjustments until the desired outcome is achieved.

Current Drop Bevel Type

Info

The different Bevel Types, including whether it is cutting from the front or the back of the mat, will determine the direction the head travels as it cuts, and dictates whether the corner is a backup or an overcut.

Tip

  • Normal Drop

  • Reverse Drop

  • Normal Drop-Front of Mat,

    • Reverse Drop-Front of Mat

    Drop Exterior Backup Too Long

    Problem:

    Panel
    panelIconIdatlassian-note
    panelIcon:note:
    bgColor#B3F5FF

    • Exterior Backup cuts Too Long.

    Resolution:

    Panel
    panelIconIdatlassian-note
    panelIcon:note:
    bgColor#B3F5FF
    Expand
    titleExterior Backup Definition

    The Exterior Backup controls where the Blade Plunges into the Matboard (not the Fallout) on the Exterior cut. 

    The Exterior Backup field is marked with a Green Arrow on the Configuration screen and the Map illustration.

    If the Exterior Backup is cut too Short, it can leave a Hook in the corner.

    If the Exterior Backup is cut too Long, Decrease the Exterior Backup.

    If the Exterior Backup is cut too Short, Increase the Exterior Backup.

    Drop Exterior Backup Too Short

    Problem:

    Panel
    panelIconIdatlassian-note
    panelIcon:note:
    bgColor#B3F5FF

    • Exterior Backup cuts Too Short.

    Resolution:

    Panel
    panelIconIdatlassian-note
    panelIcon:note:
    bgColor#B3F5FF
    Expand
    titleExterior Backup Definition

    The Exterior Backup controls where the Blade Plunges into the Matboard (not the Fallout) on the Exterior cut. 

    The Exterior Backup field is marked with a Green Arrow on the Configuration screen and the Map illustration.

    If the Exterior Backup is cut Too Short, it can leave a Hook in the corner.

    If the Exterior Backup is cut Too Long, Decrease the Exterior Backup.

    If the Exterior Backup is cut Too Short, Increase the Exterior Backup.