Page Comparison

• The Exterior Overcut on Openings is cut cuts Too long or Too short.

• Normal Bevel

• Reverse Bevel

• Normal Bevel-Front of Mat

• Reverse Bevel-Front of Mat

• If the Exterior Overcut is cut cuts Too Long, :

  • Decrease the Exterior Overcut.

• If the Exterior Overcut is cut cuts Too Short, :

  • Increase the Exterior Overcut.

• See Exterior Overcut on Openings for additional information.

The Exterior Overcut controls where the Blade Retracts from the Matboard (not the Fallout) on the Exterior cut.

The Exterior Overcut field is marked with a Red Arrow on the Configuration screen and the Map illustration.

If the Exterior Overcut is cut Too Long, Decrease the Exterior Overcut.

If the Exterior Overcut is cut Too Short, Increase the Exterior Overcut.

• The Exterior Overcut on Drops is cut cuts Too long or Too short.

• Normal Drop

• Reverse Drop

• Normal Drop-Front of Mat

• Reverse Drop-Front of Mat

• If the Exterior Overcut is cut cuts Too Long, :

  • Decrease the Exterior Overcut.

• If the Exterior Overcut is cut cuts Too Short, :

  • Increase the Exterior Overcut.

• See Exterior Overcut on Drops for additional information.

The Exterior Overcut controls where the Blade Retracts from the Matboard (not the Fallout) on the Exterior cut.

The Exterior Overcut field is marked with a Red Arrow on the Configuration screen and the Map illustration.

If the Exterior Overcut is cut Too Long, Decrease the Exterior Overcut.

If the Exterior Overcut is cut Too Short, Increase the Exterior Overcut.

• The Exterior Overcut for Outsides is cut cuts Too long or Too short.

• Outside

• Outside-Front of Mat

• If the Exterior Overcut is cut cuts Too Long, :

  • Decrease the Exterior Overcut.

• If the Exterior Overcut is cut cuts Too Short, :

  • Increase the Exterior Overcut.

• See Exterior Overcut on the Outside for additional information.

The Exterior Overcut controls where the Blade Retracts from the Matboard (not the Fallout) on the Exterior cut.

The Exterior Overcut field is marked with a Red Arrow on the Configuration screen and the Map illustration.

If the Exterior Overcut is cut Too Long, Decrease the Exterior Overcut.

If the Exterior Overcut is cut Too Short, Increase the Exterior Overcut.

• The Exterior Overcut for V-Grooves is cut cuts Too long or Too short.

• V-Grooves

• If the Exterior Overcut on the Outside Cut of the V-Groove is cut cuts Too Long, :

  • Decrease the Exterior Overcut.

• If the Exterior Overcut on the Outside Cut of the V-Groove is cut cuts Too Short, :

  • Increase the Exterior Overcut.

• See Exterior Overcut on V-Grooves for additional information.

The V-Groove Exterior Overcut controls where the Blade Retracts from the Matboard (not the Fallout)on the Exterior cuts of the Outside Cut of the V-Groove.

The V-Groove Exterior Overcut field is marked with a Red Arrow on the Configurations screen and the Map illustration.

If the Exterior Overcut on the Outside Cut of the V-Groove is cut Too Long, Decrease the Exterior Overcut.

If the Exterior Overcut on the Outside Cut of the V-Groove is cut Too Short, Increase the Exterior Overcut.

• Exterior Overcut on Creases is

• Too long or Too short.

• Crease

• If the Exterior Overcut is cut cuts Too Long, :

  • Decrease the Exterior Overcut.

• If the Exterior Overcut is cut cuts Too Short, :

  • Increase the Exterior Overcut.

• See Exterior Overcut on Creases for additional information.

The Exterior Overcut controls where the Blade Retracts from the Matboard (not the Fallout) on the Exterior cut.

The Exterior Overcut field is marked with a Red Arrow on the Configuration screen and the Map illustration.

If the Exterior Overcut is cut Too Long, Decrease the Exterior Overcut.

If the Exterior Overcut is cut Too Short, Increase the Exterior Overcut.