Versions Compared

Version Old Version 24 New Version 25
Changes made by

dani.simmonds

dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Cartridges Involved

This Configuration element involves the following Cartridges.

Info

Note: Not all cartridges are available for all CMC models.

Image Modified

Vertical Adjustment for Non-Blade Cartridges Definition

Expand
titleVertical Adjustment Definition

The Vertical Adjustment defines the global Vertical placement of objects applied with the Non-Blade Tool Cartridges.

If the Tool line is applied too far Up

Vertically

, Decrease the Vertical Adjustment.

If the Tool line is applied too far Down

Vertically

, Increase the Vertical Adjustment.

Image Modified

Adjusting the Vertical Adjustment

Tip

  • To adjust, click

plus

  • Plus/

minus

  • Minus on the desired field about five times.

  • Click OK and do another test cut.

  • Continue making adjustments until the desired outcome is achieved.

Select the Tool and Type

Image Modified

Tool Line Too Far Up

Problem:

Panel
panelIconIdatlassian-note
panelIcon:note:
bgColor#B3F5FF

  • The Tool Line is applied too far Up Vertically.

Resolution:

Panel
panelIconIdatlassian-note
panelIcon:note:
bgColor#B3F5FF

  • If the Tool

line

  • Line is applied too far Up

Vertically
Expand
titleVertical Adjustment Definition

The Vertical Adjustment defines the global Vertical placement of objects applied with the Non-Blade Tool Cartridges.

If the Tool line is applied too far Up

Vertically

, Decrease the Vertical Adjustment.

If the Tool line is applied too far Down

Vertically

, Increase the Vertical Adjustment.

Image Modified

Tool Line Too Far Down

Problem:

Panel
panelIconIdatlassian-note
panelIcon:note:
bgColor#B3F5FF

  • The Tool Line is applied too far Down Vertically.

Resolution:

Panel
panelIconIdatlassian-note
panelIcon:note:
bgColor#B3F5FF

  • If the Tool line is applied too far Down

Vertically
Expand
titleVertical Adjustment Definition

The Vertical Adjustment defines the global Vertical placement of objects applied with the Non-Blade Tool Cartridges.

If the Tool line is applied too far Up

Vertically

, Decrease the Vertical Adjustment.

If the Tool line is applied too far Down

Vertically

, Increase the Vertical Adjustment.

Image Modified
Info

  • See Also: The Vertical Home defines the global Vertical placement of objects cut with the Blade Cartridges.