Bevel Type Definition |
---|
Panel |
---|
panelIconId | atlassian-plus |
---|
panelIcon | :plus: |
---|
panelIconText | :plus: |
---|
bgColor | #FFFAE6 |
---|
| |
Expand |
---|
title | Bevel Type Definition |
---|
| The Bevel Type is the Angle that the blade cuts on the Matboard/Fallout surface when it is not cut at a 90° Right Angle. |
|
Info |
---|
The Bevel Type is the Angle that the blade cuts on the Matboard/Fallout surface when it is not cut at a 90° Right Angle. The Standard, Normal or Forward Bevel is when the Angle of the blade cuts the Matboard/Fallout surface so it slants away from the surface of the Matboard/Fallout, and the matboard core is seen from the front. The Reverse Bevel is when the Angle of the blade cuts the Matboard/Fallout surface so it slants under the surface of the Matboard/Fallout, and the matboard core is not seen from the front. The 90° Straight Bevel is the lack of Angle that the blade cuts on the Matboard/Fallout surface, as it cuts at a 90° Right Angle, and the matboard core is not seen from the front.
|
| |
| |
| |
| |
| |
| |
| |
Info |
---|
A Normal Bevel Open V-Groove consists of two cuts - one in the Matboard and one in the Fallout, mirroring each other, spaced a specified distance away. They are cut through the matboard, revealing the lower layer matboard in the exposed segment.
|
| |
Info |
---|
A Reverse Bevel Open V-Groove consists of two cuts - one in the Matboard and one in the Fallout, mirroring each other, spaced a specified distance away. They are cut through the matboard, revealing the lower layer matboard in the exposed segment.
|
| |
|