Page Comparison

See Using the Backup and Overcut Display on the Cut Preview for Troubleshooting the backups and overcuts displayed on the Cut Preview.

The Exterior Backup controls where the Blade Plunges into the Matboard (not the Fallout) on the Exterior cut. 

The Exterior Backup field is marked with a Green Arrow on the Configuration screen and the Map illustration.

If the Exterior Backup is cut too Short, it can leave a Hook in the corner.

If the Exterior Backup is cut too Long, Decrease the Exterior Backup.

If the Exterior Backup is cut too Short, Increase the Exterior Backup.

The Interior Backup controls where the Blade Plunges into the Fallout (not the Matboard) on the Interior cuts of Non-Oval Openings.

The Interior Backup field is marked with a Black Arrow on the Configuration screen and the Map illustration.

If the Interior Backup is cut too Long, Decrease the Interior Backup.

If the Interior Backup is cut too Short, Increase the Interior Backup.

The V-Groove Exterior Backup controls where the Blade Plunges into the Matboard (not the Fallout) on the Exterior cuts of the Outside Cut of the V-Groove.

The V-Groove Exterior Backup field is marked with a Green Arrow on the Configurations screen and the Map illustration.

If the Exterior Backup on the Outside Cut of the V-Groove is cut too Long, Decrease the Exterior Backup.

If the Exterior Backup on the Outside Cut of the V-Groove is cut too Short, Increase the Exterior Backup.

The V-Groove Interior Backup controls where the Blade Plunges into the Fallout (not the Matboard) on the Interior cuts on the Inside Cut of the V-Groove.

The V-Groove Interior Backup field is marked with a Black Arrow on the Configurations screen and the Map illustration.

If the Interior Backup on the Inside Cutof the V-Groove is cut too Long, Decrease the Interior Backup.

If the Interior Backup on the Inside Cutof the V-Groove is cut too Short, Increase the Interior Backup.

The Exterior Overcut controls where the Blade Retracts from the Matboard (not the Fallout) on the Exterior cut.

The Exterior Overcut field is marked with a Red Arrow on the Configuration screen and the Map illustration.

If the Exterior Overcut is cut too Long, Decrease the Exterior Overcut.

If the Exterior Overcut is cut too Short, Increase the Exterior Overcut.

The Interior Overcut controls where the Blade Retracts from the Fallout (not the Matboard) on the Interior cut.

The Interior Overcut field is marked with a White Arrow on the Configuration screen and the Map illustration.

If the Interior Overcut is cut too Long, Decrease the Interior Overcut.

If the Interior Overcut is cut too Short, Increase the Interior Overcut.

The V-Groove Exterior Overcut controls where the Blade Retracts from the Matboard (not the Fallout)on the Exterior cuts of the Outside Cut of the V-Groove.

The V-Groove Exterior Overcut field is marked with a Red Arrow on the Configurations screen and the Map illustration.

If the Exterior Overcut on the Outside Cut of the V-Groove is cut too Long, Decrease the Exterior Overcut.

If the Exterior Overcut on the Outside Cut of the V-Groove is cut too Short, Increase the Exterior Overcut.

The V-Groove Interior Overcut controls where the Blade Retracts from the Fallout (not the Matboard) on the Interior cuts of the Inside Cut of the V-Groove.

The V-Groove Interior Overcut field is marked with a White Arrow on the Configurations screen and the Map illustration.

If the Interior Overcut on the Inside Cut of the V-Groove is cut too Long, Decrease the Interior Overcut on V-Grooves.

If the Interior Overcut on the Inside Cut of the V-Groove is cut too Short, Increase the Interior Overcut on V-Grooves.