Versions Compared

Old Version 19

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version 20

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Cartridges Involved

This Configuration element involves the following Cartridges.

Info

Note: Not all cartridges are available for all CMC models.

Image Modified

Tool Configs Section

Info

  • The Tool Configs on the Configurations Screen displays the global settings for the bevel cartridge tabs. 

Image RemovedImage Added

Horizontal 

Problem:

  • The opening/object is cut in the wrong place Horizontally.

Resolution:

Expand
titleHorizontal Home Definition

The Horizontal Home defines the global Horizontal placement of objects cut with the Blade Cartridges.

If the Opening is cut too far Left Horizontally, Increase the Horizontal Home.

If the Opening is cut too far Right Horizontally, Decrease the Horizontal Home.

Image Modified

Vertical 

Problem:

  • The opening/object is cut in the wrong place Vertically.

Resolution:

Expand
titleVertical Home Definition

The Vertical Home defines the global Vertical placement of objects cut with the Blade Cartridges.

If the Object is cut too far Up Vertically, Decrease the Vertical Home.

If the Object is cut too far Down Vertically, Increase the Vertical Home.

Image Modified

Depth Bias 

Problem:

  • The opening/object is cut at the wrong depth when a SKU has been selected.

Resolution:

  • The Blade Depth is too Deep, Decrease the Depth Bias.

  • The Blade Depth is too Shallow, Increase the Depth Bias.

  • See Depth Bias for additional information.

Expand
titleDepth Bias Definition

The Depth Bias is used to calculate the properBlade Depth when the SKUselected for the matboard contains the Matboard Thickness.

The formula is: [(Default Depth) - 10]

For example, if the normal Blade Depth for 4-ply is 11, then 11-10=1, so enter 1 for the Depth Bias.

Image Modified

Plunge Count 

Problem:

  • The opening/object does not pause for a blade change while cutting.

Resolution:

Expand
titlePlunge Count Definition

The Plunge Count controls the number of Blade Plunges for each Blade Cartridge before pausing for a Blade Change.

Image Modified

Circle/Oval Rotation Button

Problem:

  • The Circle/Oval has a Feather/Bump.

Resolution:

Expand
titleFeather Definition

A Feather in an Oval Opening is a Fringe of material left behind where the cut started and ended.

The Oval Rotation controls for Bumps or Feathers on an Oval Opening.

If the Oval Opening cuts with a Feather, Decrease the Oval Rotation.

Expand
titleBump Definition

A Bump in an Oval Opening is a Lump of material left behind where the cut started and ended.

The Oval Rotation controls for Bumps or Feathers on an Oval Opening.

If the Oval Opening cuts with a Bump, Increase theOval Rotation.

Image Modified