Page Comparison

Cut the Outside As Designed

Select As Designed from the Outside Cut Options dropdown control to cut the Outside as originally designed on the CMC Z1 and Z (9000z).

Info
This can be helpful when coming from Traceor Nesting where you have already determined how you want the Outside to be cut. If you have Remnant Trimming on, it will also cut off the scrap edge.

Expand

title	Remnant Trimming Definition

Remnant Trimming feature trims off the remaining portion of the mat Horizontally or Vertically after cutting the design to make storing the leftovers easier.

Image Removed

Image Added

Advanced Outside Options

The same Outside Cut Options are available on the Advanced Outside Options screen from the Cut Mode dropdown control.
Click the Set Advanced Options button on theCut Preview screen.

Image Modified

On the Advanced Outside Options screen, set the Cut Mode to As Designed.
The Cut Mode matches the selections from the Outside Cut Options as described above.

Image Modified

This can be helpful when coming from Trace or Nesting where you had already selected how you want the Outside(s) to be cut.
If you have Remnant Trimming on, it will also cut off the scrap edge.

Expand

title	Remnant Trimming Definition

Remnant Trimming feature trims off the remaining portion of the mat Horizontally or Vertically after cutting the design to make storing the leftovers easier.

Image Removed

Image Added

Defaults: Set the Default for Cutting the Outside

Expand

title	Default Setting for Cutting the Outside

The default setting for Cutting the Outside can be set in the Admin > Editor section.

Image Modified

Defaults: Set the Default for 90 Degree Outside Cut

Expand

title	Default Setting for the 90 Degree Outside Cut

The default setting for 90 Degree Outside can be set in the Admin > Cutting section.

Image Modified

Defaults: Set the Default for the Advanced Options

Expand

title	Default Setting for the Advanced Options

The default setting for the Advanced Options can be set in the Admin > Cutting section.

Image Modified

Defaults: Set the Default for the Cut Mode

Expand

title	Default Setting for the Default Cut Mode

The default setting for the Cut Mode can be set in the Admin > Cutting section.

Image Modified

Versions Compared

Old Version 12

New Version 13

Key

Cut the Outside As Designed

Advanced Outside Options

Defaults: Set the Default for Cutting the Outside

Defaults: Set the Default for 90 Degree Outside Cut

Defaults: Set the Default for the Advanced Options

Defaults: Set the Default for the Cut Mode