The V-Groove Interior Overcut controls where the Blade Retracts from the Fallout (not the Matboard) on the Interior cuts of the Inside Cut of the Non-Oval V-Groove. The V-Groove Interior Overcut field is marked with a White Arrow on the Configurations screen and the Map illustration. If the Interior Overcut on the Inside Cut of the Non-Oval V-Groove is cut Too Long, Decrease the Interior Overcut on V-Grooves. If the Interior Overcut on the Inside Cut of the Non-Oval V-Groove is cut Too Short, Increase the Interior Overcut on V-Grooves. |