Page Comparison

Cartridges Involved

This Configuration element involves the following Cartridges.

Info
Note: Not all cartridges are available for all CMC models.

Exterior Overcut Definition

Adjusting the Exterior Overcut

Tip
To adjust, click plus/minus on the desired field about five times. Click OK and do another test cut. Continue making adjustments until the desired outcome is achieved.

Expand

title	Exterior Overcut Definition

The Exterior Overcut controls where the Blade Retracts from the Matboard (not the Fallout) on the Exterior cut.

The Exterior Overcut field is marked with a Red Arrow on the Configuration screen and the Map illustration.

If the Exterior Overcut is cut too Long, Decrease the Exterior Overcut.

If the Exterior Overcut is cut too Short, Increase the Exterior Overcut.

Select the Bevel Type for the Exterior Overcut to be Edited:

Exterior Overcut on Openings

Problem:

The Exterior Overcut on Openings is cut too long or too short.

Tip
Normal Bevel Reverse Bevel Normal Bevel-Front of Mat Reverse Bevel-Front of Mat

Resolution:

If the Exterior Overcut is cut too Long, Decrease the Exterior Overcut.
If the Exterior Overcut is cut too Short, Increase the Exterior Overcut.
See Exterior Overcut on Openings for additional information.

Expand

title	Exterior Overcut Definition

The Exterior Overcut controls where the Blade Retracts from the Matboard (not the Fallout) on the Exterior cut.

The Exterior Overcut field is marked with a Red Arrow on the Configuration screen and the Map illustration.

If the Exterior Overcut is cut too Long, Decrease the Exterior Overcut.

If the Exterior Overcut is cut too Short, Increase the Exterior Overcut.

Exterior Overcut on Drops

Problem:

The Exterior Overcut on Drops is cut too long or too short.

Tip
Normal Drop Reverse Drop Normal Drop-Front of Mat Reverse Drop-Front of Mat

Resolution:

If the Exterior Overcut is cut too Long, Decrease the Exterior Overcut.
If the Exterior Overcut is cut too Short, Increase the Exterior Overcut.
See Exterior Overcut on Drops for additional information.

Expand

title	Exterior Overcut Definition

The Exterior Overcut controls where the Blade Retracts from the Matboard (not the Fallout) on the Exterior cut.

The Exterior Overcut field is marked with a Red Arrow on the Configuration screen and the Map illustration.

If the Exterior Overcut is cut too Long, Decrease the Exterior Overcut.

If the Exterior Overcut is cut too Short, Increase the Exterior Overcut.

Exterior Overcut on the Outside

Problem:

The Exterior Overcut for Outsides is cut too long or too short.

Tip
Outside Outside-Front of Mat

Resolution:

If the Exterior Overcut is cut too Long, Decrease the Exterior Overcut.
If the Exterior Overcut is cut too Short, Increase the Exterior Overcut.
See Exterior Overcut on the Outside for additional information.

Expand

title	Exterior Overcut Definition

The Exterior Overcut controls where the Blade Retracts from the Matboard (not the Fallout) on the Exterior cut.

The Exterior Overcut field is marked with a Red Arrow on the Configuration screen and the Map illustration.

If the Exterior Overcut is cut too Long, Decrease the Exterior Overcut.

If the Exterior Overcut is cut too Short, Increase the Exterior Overcut.

Exterior Overcut on V-Grooves

Problem:

The Exterior Overcut for V-Grooves is cut too long or too short.

Tip
V-Grooves

Resolution:

If the Exterior Overcut on the Outside Cut of the V-Groove is cut too Long, Decrease the Exterior Overcut.
If the Exterior Overcut on the Outside Cut of the V-Groove is cut too Short, Increase the Exterior Overcut.
See Exterior Overcut on V-Grooves for additional information.

Expand

title	V-Groove Exterior Overcut Definition

The V-Groove Exterior Overcut controls where the Blade Retracts from the Matboard (not the Fallout)on the Exterior cuts of the Outside Cut of the V-Groove.

The V-Groove Exterior Overcut field is marked with a Red Arrow on the Configurations screen and the Map illustration.

If the Exterior Overcut on the Outside Cut of the V-Groove is cut too Long, Decrease the Exterior Overcut.

If the Exterior Overcut on the Outside Cut of the V-Groove is cut too Short, Increase the Exterior Overcut.

Exterior Overcut on Creases

Problem:

The Exterior Overcut on Creases is applied too long or too short.

Tip
Crease

Resolution:

If the Exterior Overcut is cut too Long, Decrease the Exterior Overcut.
If the Exterior Overcut is cut too Short, Increase the Exterior Overcut.
See Exterior Overcut on Creases for additional information.

Expand

title	Exterior Overcut Definition

The Exterior Overcut controls controls where the blade retracts from the matboard on exterior cutsthe Blade Retracts from the Matboard (not the Fallout) on the Exterior cut.

The Exterior Overcut field is marked with a Red Arrow on the Configuration screen and the Map illustration.

If the Exterior Overcut is cut too Long, Decrease the Exterior Overcut.

If the Exterior Overcut is cut too Short, Increase the Exterior Overcut.

Versions Compared

Old Version 26

New Version 27

Key

Cartridges Involved

Exterior Overcut Definition

Select the Bevel Type for the Exterior Overcut to be Edited:

Exterior Overcut on Openings

Problem:

Resolution:

Exterior Overcut on Drops

Problem:

Resolution:

Exterior Overcut on the Outside

Problem:

Resolution:

Exterior Overcut on V-Grooves

Problem:

Resolution:

Exterior Overcut on Creases

Problem:

Resolution: