Page Comparison

Cut the Outside As Designed

Select As Designed from the Outside Cut Options dropdown control to cut the outside Outside as originally designed on the CMC Z1 and Z (9000z).

Info
This can be helpful when coming from Traceor Nesting where you have already determined how you want the outside Outside to be cut. If you have Remnant Trimming on, it will also cut off the scrap edge.

Expand

title	Remnant Trimming Definition

Remnant Trimming feature trims off the remaining portion of the mat Horizontally or Vertically after cutting the design to make storing the leftovers easier.

Advanced Outside Options

The same Outside Cut Options are available on the Advanced Outside Options screen from the Cut Mode dropdown control.
Click the Set Advanced Options button on theCut Preview screen.

On the Advanced Outside Options screen, set the Cut Mode to As Designed.
The Cut Mode matches the selections from the Outside Cut Options as described above.

This can be helpful when coming from Trace or Nesting where you had already selected how you want the outsideOutside(s) to be cut.
If you have Remnant Trimming on, it will also cut off the scrap edge.

Expand

title	Remnant Trimming Definition

Remnant Trimming feature trims off the remaining portion of the mat Horizontally or Vertically after cutting the design to make storing the leftovers easier.

Defaults: Set the Default for Cutting the Outside

Expand

title	Default Setting for Cutting the Outside

The default setting for Cutting the Outside can be set in the Admin > Editor section.

...

Versions Compared

Old Version 11

New Version 12

Key

Cut the Outside As Designed

Advanced Outside Options

Defaults: Set the Default for Cutting the Outside