Page Comparison

Blade Depth Button

Info
Use the Blade Depth screen to select the Blade Depth for the current layer.

Click the Blade Depth Button to open the Blade Depth screen which allows the user to set the software blade depth for the current design.

...

V-Groove Definition

Select the desired V-Groove Blade Depth value* in the V-Grooves field.
If desired, enter notes in the Label field for future references for this particular blade depth.
Entering a Label for a blade depth value will make it available from the Blade Depth Quick Select dropdown control.

*This value should match the number on the physical Blade Depth dial.

V-Groove Blade Depth Value
Expand
title

A Closed V-Groove is a decorative channel that is cut about halfway through the thickness of the matboard, exposing the matboard core.

Expand

title	V-Groove Definition

A Normal Bevel Closed V-Groove consists of two cuts - one in the Matboard and one in the Fallout, mirroring each other. They are cut Halfway through the matboard, revealing the Matboard Core.

The Normal Bevel is when the Angle of the blade cuts the Matboard/Fallout surface so it Slants Away from the surface of the Matboard/Fallout, and the Matboard Core is Seen from the front.

Set As Default
Click the Set As Default button to set the current Blade Depth value as the Default Blade Depth for the associated Opening or V-Groove field.

...

See Also: Blade Depth Quick Select

Info
Optionally, use the Blade Depth Quick Select dropdown control to select one of the preset Blade Depths for the current design.

Click the Blade Depth Quick Select dropdown control which is the mat corner sample at the top of the screen on the Cut Preview Screen.
Select the desired preset Blade Depth for the current layer from the dropdown control.
The selected Blade Depth will be applied to the current layer.

...

Versions Compared

Old Version 12

New Version 13

Key

Blade Depth Button

V-Groove Blade Depth Value

Set As Default

See Also: Blade Depth Field

See Also: Blade Depth Quick Select