Versions Compared

Old Version 27

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version 28

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

CutArt Properties

Info

  • Use CutArt Properties to edit the individual proprietary adjustments available for the CutArt.

Info

  • Optionally, Right-Click on the CutArt and select Edit.

Expand
titleCutArt Definition

CutArt™ are simple shapes and design elements created by Wizard.

CutArts can be applied to your current design and resized and rotated. They can be Cut, Debossed, Penned or cut on Vinyl.

Use the CutArt Opening section to add a label or select a different CutArt.

CutArt Opening 

Info

Name

Info

  • The name of the current CutArt is displayed in the Name field. 

Label

  • Enter the desired text in the Label field.

  • The label will be displayed on the CutArt opening. 

Info

Change CutArt

Info

  • Change the CutArt with the Change CutArt button.

  • Click the Change CutArt button.

  • The Load CutArt screen opens to allow you to select a different CutArt.

  • Select the desired CutArt to replace the previous CutArt.

Set the Default to Auto Label Multi Openings

Expand
titleDefault Settings to Auto Label Multi Openings

Set the default for Auto Label Multi Openings in the Admin > Editor section.

info

Dimensions

Use the 

Dimensions

Section to change the size, lock dimensions, set the X/Y positioning, or rotate the CutArt.

Dimensions

  • Enter the object CutArt Width. 

  • Enter the object CutArt Height. 

Expand
titleSizes Button Definition

The Sizes Button displays the Recent and Standard sizes. 

Recent lists the last ten sizes entered.

Standard lists Standard sizes associated with the current unit of measurement.

Expand
titleSwap Button Definition

The Swap Button switches the values between the width and height fields.

...

Lock or Unlock CutArt Size

Info

  • Lock the size of the object to avoid adjusting it when dragging the mouse.

  • Click unlock Unlock to Lock the size of the current object. 

  • Click locked Locked to Unlock the size of the current object.

Expand
titleLock Object Size Definition

Use the Lock/Unlock feature to prevent the size of the opening from being changed by accidentally dragging the control corners with the mouse in Designer.

X and Y Position Fields

Info

  • Use the X/Y Position fields to move objects to specific horizontalHorizontal/verticalVertical coordinates.

  • Enter the new X position to move the selected object horizontally Horizontally.

  • Enter the new Y to move the selected object vertically Vertically.

Info

  • Lines shown for illustration.

Expand
titleX Position Definition

The X Position field is used to manually set the Horizontal position of the selected object in Designer and the Cut Preview. 

Expand
titleY Position Definition

The Y Position field is used to manually set the Vertical position of the selected object in Designer and the Cut Preview. 

Rotation Entry Field

  • Enter the desired degree Degree of Rotation* for the selected object.

Info

  • The selected object will pivot from the center point.  

Info
Expand
titleRotation Definition

The Rotation function in Designer is the action of rotating the selected object(s) around an axis or center by the specified number of degrees.

Minimum Width and Height

Min Width 

Info

  • The original Original CutArt width Width is displayed in the Min Width field.  

Min Height 

Info

  • The original Original CutArt height Height is displayed in the Min Height field.

Note

  • Cutting below the Minimum Width/Height is not recommended.

Expand
titleMin Height and Width Definition

Min Height displays the Minimum Height that the selected CutArt or LetterMat has been tested to cut. The CutArt/LetterMat can be Debossed or Penned at a much smaller size.

CutArt Options

Info

  • Use the CutArt Options section to select Mirror, set KAR and Use Original Size for the CutArt.

Mirror the CutArt

Info

  • Mirror flips the CutArt Horizontally.

  • Click on the CutArt.

  • Check Mirror the CutArt checkbox to flip the CutArt horizontally Horizontally.

Info

To flip the design vertically Vertically, see Rotation above.

  • The CutArt is mirrored horizontally Horizontally. 

Info

  • To flip the design vertically Vertically, see Rotation above.

Keep Aspect Ratio

Info
Note

  • For best results, it is recommended to have KAR checked to avoid skewing the CutArt.

Expand
titleKAR Definition

Keep Aspect Ratio (KAR) keeps the CutArt, Image, LetterMat, etc. Height and Width proportionate to avoid distortion in Designer.

Info

  • The CutArt will remain heightHeight/widthWidth proportionate when resized.

Use Original Size

  • The Use Original Size button to reset the CutArt to the original size Original Size it was drawn. 

Note

  • Cutting smaller than original size Original Size is not recommended, and may give unexpected results.

  • CutArts can be Debossed, Penned and cut on Vinyl much smaller than they can be cut on Matboard.

Cartridge Selection and Type

  • Click the Cartridge Icon and select the desired cartridge for the current layer.

Expand
titleCartridge Definition

A Cartridge is the physical component that holds a Blade, Deboss Stylus, Pen or other application tool.

  • When applicable, select the desired Cartridge Type from the Type dropdown control. 

Info

  • Selections available are dependent upon the Cartridge selected.