Versions Compared

Old Version 25

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version 26

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Cartridges Involved

This Configuration element involves the following Cartridges.

Info

Note: Not all cartridges are available for all CMC models.

Exterior Overcut Definition

expand
The Exterior Overcut controls where the blade retracts from the matboard on exterior cuts.
title

Exterior Overcut Definition

Adjusting the Exterior Overcut

Tip

  • To adjust, click plus/minus on the desired field about five times.

  • Click OK and do another test cut.

  • Continue making adjustments until the desired outcome is achieved.

Expand
titleExterior Overcut Definition

The Exterior Overcut controls where the Blade Retracts from the Matboard (not the Fallout) on the Exterior cut.

The Exterior Overcut controls where the blade retracts from the matboard on exterior cuts

  • .

Select the Bevel Type for the Exterior Overcut to be Edited:

Exterior Overcut on Openings

Problem:

  • The Exterior Overcut on Openings is cut too long or too short.

Expand
titleExterior Overcut Definition
Tip

  • Normal Bevel

  • Reverse Bevel

  • Normal Bevel-Front of Mat

  • Reverse Bevel-Front of Mat

Resolution:

Expand
titleExterior Overcut Definition

The Exterior Overcut controls where the Blade Retracts from the Matboard (not the Fallout) on the Exterior cut.

Exterior Overcut on Drops 

Problem:

  • The Exterior Overcut on Drops is cut too long or too short.

Expand
titleExterior Overcut Definition
The Exterior Overcut controls where the blade retracts from the matboard on exterior cuts

  • .

Tip

  • Normal Drop

  • Reverse Drop

  • Normal Drop-Front of Mat

  • Reverse Drop-Front of Mat

Resolution:

Expand
titleExterior Overcut Definition

The Exterior Overcut controls where the Blade Retracts from the Matboard (not the Fallout) on the Exterior cut.

Exterior Overcut on the Outside

Problem:

  • The Exterior Overcut for Outsides is cut too long or too short.

Expand
titleExterior Overcut Definition
The Exterior Overcut controls where the blade retracts from the matboard on exterior cuts

  • .

Tip

  • Outside

  • Outside-Front of Mat

Resolution:

Expand
titleExterior Overcut Definition

The Exterior Overcut controls where the Blade Retracts from the Matboard (not the Fallout) on the Exterior cut.

Exterior Overcut on V-Grooves 

Problem:

  • The Exterior Overcut for V-Grooves is cut too long or too short.

Groove Exterior Overcut Definition
Expandtip
title

  • V-

The V-Groove Exterior Overcut controls where the blade retracts from the matboard on exterior cuts on the outside cut

  • Grooves

Resolution:

  • If the Exterior Overcut on the Outside Cut of the V-Groove

.
Tip

  • V-Grooves

Resolution:

  • If the exterior overcut is too long, decrease is cut too Long, Decrease the Exterior Overcut.

  • If the exterior overcut is too short, increase the Exterior Overcut on the Outside Cut of the V-Groove is cut too Short, Increase the Exterior Overcut.

  • See Exterior Overcut on V-Grooves for additional information.

Expand
titleV-Groove Exterior Overcut Definition

The V-Groove Exterior Overcut controls where the Blade Retracts from the Matboard (not the Fallout)on the Exterior cuts of the Outside Cut of the V-Groove.

Exterior Overcut on Creases

Problem:

The Exterior Overcut on Creases is applied too long or too short.

Expand
titleExterior Overcut Definition
The Exterior Overcut controls where the blade retracts from the matboard on exterior cuts

.

Tip

  • Crease

Resolution:

Expand
titleExterior Overcut Definition

The Exterior Overcut controls where the blade retracts from the matboard on exterior cuts.