Versions Compared

Old Version 48

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version 49

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Cartridges Involved

This Configuration element involves the following Cartridges.

Info

Note: Not all cartridges are available for all CMC models.

expand

Adjusting the Exterior Backup

Exterior Backup on Drops Definition

titleExterior Backup Definition

The Exterior Backup controls where the blade plunges into the matboard on exterior cuts.

Tip

  • To adjust, click plus/minus on the desired field about five times.

  • Click OK and do another test cut.

  • Continue making adjustments until the desired outcome is achieved.

Expand
titleExterior Backup Definition

The Exterior Backup controls where the Blade Plunges into the Matboard (not the Fallout) on the Exterior cut. Displayed as Green Arrows.

Current Drop Bevel Type

Info

The different Bevel Types, including whether it is cutting from the front or the back of the mat, will determine the direction the head travels as it cuts, and dictates whether the corner is a backup or an overcut.

Tip

  • Normal Drop

  • Reverse Drop

  • Normal Drop-Front of Mat,

  • Reverse Drop-Front of Mat

Drop Exterior Backup Too Long

Problem:

  • The Exterior Backup is cut too long Too Long.

Resolution:

Expand
titleExterior Backup Definition

The The Exterior Backup controls where the blade plunges into the matboard on exterior cuts.

Resolution:

Decrease the Exterior Backup

the Blade Plunges into the Matboard (not the Fallout) on the Exterior cut. Displayed as Green Arrows.

Drop Exterior Backup Too Short

Problem:

  • The Exterior Backup is cut Too Short.

Resolution:

  • If the Exterior Backup is cut too shortShort, Increase the Exterior Backup.

Expand
titleExterior Backup Definition

The The Exterior Backup controls where the blade plunges into the matboard on exterior cuts.

Resolution:

Increase the Exterior Backup

the Blade Plunges into the Matboard (not the Fallout) on the Exterior cut. Displayed as Green Arrows.