Versions Compared

Version Old Version 21 New Version 22
Changes made by

dani.simmonds

dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Cartridges Involved

This Configuration element involves the following Cartridges.

Info

Note: Not all cartridges are available for all CMC models.

Vertical Adjustment for Non-Blade Cartridges Definition

Expand
titleVertical Adjustment Definition

The Vertical Adjustment defines  defines the global vertical Vertical placement of objects applied with the non-blade cartridges (Deboss, Penor Vinyl) Non-Blade Tool Cartridges.

Adjusting the Vertical Adjustment

Tip

  • To adjust, click plus/minus on the desired field about five times.

  • Click OK and do another test cut.

  • Continue making adjustments until the desired outcome is achieved.

Select the Tool and Type

Tool Line Too Far Up

Problem:

  • The tool Tool Line is applied too far Up Vertically.

Resolution:

Expand
titleVertical Adjustment Definition

The Vertical Adjustment defines  defines the global vertical Vertical placement of objects applied with the non-blade cartridges (Deboss, Penor Vinyl).

Resolution:

  • Decrease the Vertical Adjustment.

    • See Vertical Adjustment for additional information

    Non-Blade Tool Cartridges.

    Problem:

    • The opening cuts in the wrong place Vertically.

    The Vertical Adjustment defines the global vertical placement of objects applied with the non-blade cartridges (Deboss, Penor Vinyl).

    Resolution:

    Increase adjust

    Resolution:

    Tool Line Too Far Down

    Problem:

    • The tool line Tool Line is applied too far down Down Vertically.

    Expand
    titleVertical Adjustment Definition
    Image Removed

    See Also: Opening Cuts in the Wrong Place Vertically when not cutting the Outside

    Expand
    titleVertical Adjustment Definition

    The Vertical

    Home defines

    Adjustment defines the global

    vertical

    Vertical placement of objects

    cut

    Resolution:

    • If too far down, increase the Vertical Home.

    • If too far up, decrease the Vertical Home.

    • See Vertical Home for additional information.

    Image Removed

    applied with the

    blade cartridges.

    Non-Blade Tool Cartridges.

    		Image Added
    Info

    • See Also: The Vertical Home defines the global Vertical placement of objects cut with the Blade Cartridges.