Versions Compared

Old Version 24

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version 25

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Normal Bevel

Info

  • A Normal Bevel opening is cut from the back* of the mat, and displays an exposed bevel in the face of the matboard.

Expand
titleNormal Bevel Definition

A Normal Bevel opening displays an exposed bevel in the face of the matboard.

Tip

*See Normal Bevel Opening - Front of Mat below for editing configurations when cutting from the front of the mat.

**See 45 Degree Front Normal Bevel Opening - Front of Mat below for the 45 Degree Front Cartridge Configurations.

Reverse Bevel

Info

  • A Reverse Bevel opening is cut from the back* of the mat, and does not display an exposed bevel in the face of the matboard.

Expand
titleReverse Bevel Definition

A Reverse Bevel opening displays no exposed bevel in the face of the matboard.

Tip

*See Reverse Bevel Opening - Front of Mat below for editing configurations when cutting from the front of the mat.

**See 45 Degree Front Reverse Bevel Opening - Front of Mat below for the 45 Degree Front Cartridge Configurations.

Normal Drop

Info

  • A Normal Drop is the fallout that is cut from the back* of the mat, which displays an exposed bevel on the face of the matboard.

  • When cutting an Open V-Groove, the inside cut uses the Normal Drop bevel configuration and the outside cuts with a Normal Bevel configuration.

Expand
titleNormal Drop Definition

A Normal Drop Bevel is a drop that displays an exposed bevel on the face of the matboard drop.

Tip

*See Normal Drop - Front of Mat below for editing configurations when cutting from the front of the mat.

**See 45 Degree Front Normal Drop - Front of Mat below for the 45 Degree Front Cartridge Configurations.

Reverse Drop

Info

  • A Reverse Drop is the fallout that is cut from the back* of the mat, which does not display an exposed bevel on the face of the matboard.

  • When cutting a Reverse Bevel Open V-Groove, the inside cut uses the Reverse Drop bevel configuration and the outside cuts with a Reverse Bevel configuration.

Expand
titleReverse Drop Definition

A Reverse Drop Bevel is a drop that displays no exposed bevel on the face of the matboard drop.

Tip

*See Reverse Drop - Front of Mat below for editing configurations when cutting from the front of the mat.

**See 45 Degree Front Reverse Drop - Front of Mat below for the 45 Degree Front Cartridge Configurations.

Outside

Info

  • An Outside is the outside cut of the mat that is cut from the back* of the mat, and does not display an exposed bevel on the face of the matboard.

Expand
titleOutside Bevel Definition

The Outside Bevel cut of the mat does not display an exposed bevel on the face of the matboard outside.

Tip

*See Outside - Front of Mat below for editing configurations when cutting from the front of the mat.

**See 45 Degree Front Outside - Front of Mat below for the 45 Degree Front Cartridge Configurations.

Normal Bevel - Front of Mat

Info

  • A Normal Bevel - Front of Mat opening is cut from the front* of the mat, and displays an exposed bevel in the face of the matboard.

Expand
titleNormal Bevel Definition

A Normal Bevel opening displays an exposed bevel in the face of the matboard.

Tip

*See Normal Bevel Opening above for editing configurations when cutting from the back of the mat.

Reverse Bevel - Front of Mat

Info

  • A Reverse Bevel - Front of Mat opening is cut from the front* of the mat, and does not display an exposed bevel in the face of the matboard. 

Expand
titleReverse Bevel Definition

A Reverse Bevel opening displays no exposed bevel in the face of the matboard.

Tip

*See Reverse Bevel Opening above for editing configurations when cutting from the back of the mat.

Normal Drop - Front of Mat

Info

  • A Normal Drop - Front of Mat is the fallout that is cut from the front* of the mat, which displays an exposed bevel on the face of the matboard.

  • When cutting an Open V-Groove from the front, the inside cut uses the Normal Drop - Front of Mat bevel configuration and the outside cuts with a Normal Bevel - Front of mat configuration.

Expand
titleNormal Drop Definition

A Normal Drop Bevel is a drop that displays an exposed bevel on the face of the matboard drop.

Tip

*See Normal Drop above for editing configurations when cutting from the back of the mat.

Reverse Drop - Front of Mat

Info

  • A Reverse Drop - Front of Mat is the fallout that is cut from the front* of the mat, which does not display an exposed bevel on the face of the matboard.

  • When cutting a Reverse Bevel Open V-Groove from the Front, the inside cut uses the Reverse Drop - Front of Mat bevel configuration and the outside cuts with a Reverse Bevel - Front of Mat configuration.

Expand
titleReverse Drop Definition

A Reverse Drop Bevel is a drop that displays no exposed bevel on the face of the matboard drop.

Tip

*See Reverse Drop above for editing configurations when cutting from the back of the mat.

Outside - Front of Mat

Info

  • An Outside - Front of Mat is the outside cut of the mat that is cut from the front* of the mat, which does not display an exposed bevel on the face of the matboard.

Expand
titleOutside Bevel Definition

The Outside Bevel cut of the mat does not display an exposed bevel on the face of the matboard outside.

Tip

*See Outside above for editing configurations when cutting from the back of the mat.

V-Groove

Info

  • A V-Groove is a thin channel cut into the face of the matboard to reveal the matboard core color. It is cut from the front of the mat, and any other openings on that layer will also be cut from the front.

Expand
titleV-Groove Definition

A Closed V-Groove is a decorative channel that is cut about halfway through the thickness of the matboard, exposing the matboard core.

Closed V-Grooves are cut from the front of the mat.

...