Page Comparison

Cut the Outside As Designed

Select As Designed from the Outside Cut Options dropdown control to cut the outside as originally designed on the CMC Z1 and Z (9000z).

Info
This can be helpful when coming from Traceor Nesting where you have already determined how you want the outside to be cut. If you have Remnant Trimming on, it will also cut off the scrap edge.

Advanced Outside Options
The same Outside Cut Options are available on the Advanced Outside Options screen from the Cut Mode dropdown control. Click the Set Advanced Options button on theCut Preview screen.
On the Advanced Outside Options screen, set the Cut Mode to As Designed. The Cut Mode matches the selections from the Outside Cut Options as described above.	Image Modified
This can be helpful when coming from Trace or Nesting where you had already selected how you want the outside(s) to be cut. If you have Remnant Trimming on, it will also cut off the scrap edge.

Expand

title	Default Setting for Cutting the Outside

The default setting for Cutting the Outside can be set in the Admin > Editor section.

...